技术标签: RDMA
目录
原文:https://www.rdmamojo.com/2013/02/15/ibv_poll_cq/ (强烈建议去看原文)
ibv_poll_cq()从完成队列(CQ)轮询WC(工作完成),非阻塞函数。
[工作完成] 表示 WQ(工作队列)中的WR(工作请求) 以及与CQ相关联的所有已发布到该工作队列的未发出信号的WR(工作请求)均已完成。
(A Work Completion indicates that a Work Request in a Work Queue, and all of the outstanding unsignaled Work Requests that posted to that Work Queue, associated with the CQ are done.)
任何发送和接收请求 以及以错误结束的发送请求,将在处理结束后生成WC(工作完成)。
(Any Receive Requests, signaled Send Requests and Send Requests that ended with an error will generate a Work Completion after their processing end.)
当[工作请求]结束时,会将[工作完成]添加到与此工作队列相关联的CQ的尾部。 ibv_poll_cq()检查CQ中是否存在[工作完成],并按其输入顺序从CQ的顶部弹出(FIFO)。从CQ弹出[工作完成]后,无法将其返回给CQ。
应该以比产生WC更快的速度消费CQ中的WC,防止CQ队列溢出,如果发生CQ溢出,将触发异步事件IBV_EVENT_CQ_ERR,并且无法再使用CQ。
Name | Direction | Description |
---|---|---|
cq | in | 从ibv_create_cq()返回的CQ |
num_entries | in | 期望从CQ读取的WC数 |
wc | out | 从CQ读取的WC数num_entries的数组。(Array of size num_entries of the Work Completions that will be read from the CQ) |
结构ibv_wc描述了wc的属性。
struct ibv_wc {
uint64_t wr_id;
enum ibv_wc_status status;
enum ibv_wc_opcode opcode;
uint32_t vendor_err;
uint32_t byte_len;
uint32_t imm_data;
uint32_t qp_num;
uint32_t src_qp;
int wc_flags;
uint16_t pkey_index;
uint16_t slid;
uint8_t sl;
uint8_t dlid_path_bits;
};
这是struct ibv_wc的完整说明:
wr_id | 与WR对应关联的64 bit值 (The 64 bits value that was associated with the corresponding Work Request) |
status | Status of the operation. The value can be one of the following enumerated values and their numeric value: 操作状态。该值可以是下列枚举值及其数字值之一:
|
opcode | The operation that the corresponding Work Request performed. This value controls the way that data was sent, the direction of the data flow and the valid attributes in the Work Completion. The value can be one of the following enumerated values: 相应的工作请求执行的操作。此值控制数据的发送方式、数据流的方向以及“工作完成”中的有效属性。该值可以是下列枚举值之一:
|
vendor_err | 供应商特定的错误,如果completion 因错误而结束,则会提供更多信息。一旦WC以错误结束,该值向RDMA设备的供应商提供有关失败原因的提示。 |
byte_len | 传输的字节数。与incoming Send或 RDMA Write with immediate operations的接收队列有关。该值不包括立即数的长度(如果存在)。与RDMA读取和原子操作的“发送队列”相关。对于不与SRQ关联的UD QP的接收队列,或者对于与UD QP关联的SRQ,该值等于消息的有效负载加上为GRH保留的40个字节。传输的字节数是消息的有效负载加上为GRH保留的40个字节(无论是否存在GRH) (The number of bytes transferred. Relevant if the Receive Queue for incoming Send or RDMA Write with immediate operations. This value doesn't include the length of the immediate data, if such exists. Relevant in the Send Queue for RDMA Read and Atomic operations.For the Receive Queue of a UD QP that is not associated with an SRQ or for an SRQ that is associated with a UD QP this value equals to the payload of the message plus the 40 bytes reserved for the GRH.The number of bytes transferred is the payload of the message plus the 40 bytes reserved for the GRH, whether or not the GRH is present) |
imm_data | (可选)以网络顺序的SEND或RDMA WRITE操作码中的32 bit 数字,与有效载荷一起发送到远程端,并放置在[接收工作完]( Receive Work Completion)成中,而不是在远端内存缓冲区中。如果设置了IBV_WC_WITH_IMM,则此值有效 |
qp_num | 已完成的WR的本地QP的号码。与和SRQ相关的[接收工作完成](Receive Work Completions)相关. (Local QP number of completed WR. Relevant for Receive Work Completions that are associated with an SRQ) |
src_qp | Source QP number (remote QP number) of completed WR. Relevant for Receive Work Completions of a UD QP |
wc_flags | Flags of the Work Completion. It is either 0 or the bitwise OR of one or more of the following flags:
|
pkey_index | P_Key index. Relevant for GSI QPs |
slid | Source LID (the base LID that this message was sent from). Relevant for Receive Work Completions of a UD QP |
sl | Service Level (the SL LID that this message was sent with). Relevant for Receive Work Completions of a UD QP |
dlid_path_bits | Destination LID path bits. Relevant for Receive Work Completions of a UD QP (not applicable for multicast messages) |
以下测试(opcode & IBV_WC_RECV)将指示 来自接收队列的完成状态。(The following test (opcode & IBV_WC_RECV) will indicate that the status of a completion is from the Receive Queue.)
对于UD QP的[接收工作完成](receive Work Completions),无论是否设置了IBV_WC_GRH位,数据均从已发布的接收缓冲区的偏移量40开始。
并非所有wc属性始终有效。如果完成状态不是IBV_WC_SUCCESS,则仅以下属性有效:
Value | Description |
---|---|
正数 | 从CQ读取的WC数及其值在wc中返回。如果该值小于num_entries,则表示CQ中没有更多的工作完成。如果此值等于num_entries,则CQ中可能会有更多的工作完成 |
0 | CQ为空 |
负数 | 尝试从CQ读取WC(工作完成)时发生故障 |
从CQ轮询WC(工作完成)(在轮询模式下):
struct ibv_wc wc;
int num_comp;
do {
num_comp = ibv_poll_cq(cq, 1, &wc);
} while (num_comp == 0);
if (num_comp < 0) {
fprintf(stderr, "ibv_poll_cq() failed\n");
return -1;
}
/* verify the completion status */
if (wc.status != IBV_WC_SUCCESS) {
fprintf(stderr, "Failed status %s (%d) for wr_id %d\n",
ibv_wc_status_str(wc.status),
wc.status, (int)wc.wr_id);
return -1;
}
那工作完成(WC)到底是什么?
工作完成意味着相应的工作请求已结束,缓冲区可以(重新)用于读取,写入或释放。
ibv_poll_cq()是否引起上下文切换?
否。Work Completions的轮询根本不会导致上下文切换;它不会导致上下文切换。这就是为什么RDMA技术可以实现极低的延迟(低于1 usc)的原因。
Is there a limit to the number of Work Completions that can we polled when calling ibv_poll_cq()?
调用ibv_poll_cq()时可以轮询的[工作完成](Work Completions 数量是否有限制?
没有,你想读多少都行。
我调用了ibv_poll_cq(),它填充了我提供给它的所有数组。我能否知道CQ中还有多少工作完成?
不,你不能。
我从UD QP的接收队列中获得了工作完成(WC),并且进展顺利。我从内存缓冲区中读取了数据,但数据不正确。为什么?
也许您查看了数据的起始偏移量0。对于UD QP的任何工作完成,无论是否存在GRH,数据都将放置在相关内存缓冲区的偏移量40中。
什么是GRH,为什么我需要它?
全局路由头(GRH)提供的信息对于将消息发回给此消息的发件人(如果来自其他子网或来自多播组)最有用。
I've got completion with error status. Can I read all of the Work Completion fields?
否。如果“工作完成”状态表明存在错误,则仅以下属性有效:wr_id,status,qp_num和vendor_err。其余属性未定义。
我从CQ上Read了一个WC,但我不需要,我可以将其退还给CQ吗?
不,你不能。
我可以阅读属于特定工作队列的工作完成吗?(Can I read Work Completion that belongs to a specific Work Queue?)
不,你不能。
如果添加的工作完成(WC)数量超过CQ的size,将会发生什么情况?
CQ将超限,并且CQ(以及与之关联的所有QP)将进入错误状态。
文章浏览阅读916次,点赞21次,收藏20次。 这两年开始毕业设计和毕业答辩的要求和难度不断提升,传统的毕设题目缺少创新和亮点,往往达不到毕业答辩的要求,这两年不断有学弟学妹告诉学长自己做的项目系统达不到老师的要求。为了大家能够顺利以及最少的精力通过毕设,学长分享优质毕业设计项目,今天要分享的是基于STM32自行车智能无线防盗报警器学长这里给一个题目综合评分(每项满分5分)难度系数:3分工作量:4分创新点:4分。
文章浏览阅读617次。开始_程序 中搜索:anaconda prompt (控制台)输入pip出现pip的一些信息,可以忽略接着输入 pip install 模块名称例如:pip install alphalens最后显示安装成功转载于:https://www.cnblogs.com/xuying-fall/p/8484617.html..._anaconda中怎么安装其他的module
文章浏览阅读261次。1. Broker 配置信息 属性 默认值 描述 broker.id 必填参数,broker的唯一标识 log.dirs /tmp/kafka-logs Kafka数据存放的目录。可以指定多个目录,中间用逗号分隔,..._kafka configuration property queue.buffering.max.kbytes is a producer proper
文章浏览阅读1.5k次。function [sys,x0,str,ts] = anneal(t,x,u)switch flag,%%%%%%%%%%%%%%%%%%% Initialization %%%%%%%%%%%%%%%%%%%case 0,[sys,x0,str,ts]=mdlInitializeSizes(t,x,u);%%%%%%%%%%%%%%%% Derivatives %%%%%%%%%%%%%%%%..._将初值传递给s函数
文章浏览阅读155次。https://www.jianshu.com/p/4675e4db0d33_class属性值为什么开头
文章浏览阅读220次。1. 命名空间的问题-----------------------------namespace 1.0.3 版本包含文件类型前面不需要加命名空间,但是1.1.0 中包含需要在类型前加命名空间include必须放在namespace前面例如:include “aa.fbs”namespace IM.test;foo.fbcnamespace f..._structs may contain only scalar or struct fields
文章浏览阅读1.9k次,点赞40次,收藏25次。基于GEE的Landsat数据去云处理_gee 去云
文章浏览阅读1.2k次,点赞18次,收藏30次。才是我创造的动力。关注我,同时可以期待后续文章ing,不定期分享原创知识。想要获取更多完整鸿蒙最新VIP学习资料,请点击→《鸿蒙全套学习指南。_hvigorversion
文章浏览阅读4.3w次。爬一个网站时出现了乱码 è§�æ½å¥�å¸åº�1ã��2ã��9ã��10ã��13å�·æ¥¼ html = requests.get(url=start_urls, headers=headers).text html = html.encode("ISO-8859-1") html = html.decode("utf-8") response = et..._h 1 è ° o python爬虫打印出现
文章浏览阅读83次。链接:https://www.luogu.org/problemnew/show/CF55D题意翻译题目描述Volodya是一个很皮的男♂孩。他认为一个能被它自己的每一位数上的数整除的数是很妙的。我们先忽略他的想法的正确性(如需证明请百度“神奇海螺”),只回答在l到r之间有多少个很妙的数字。输入输出格式输入:总共有t个询问:第一行:t;接下来t行:每行两个数l和r。..._cf55d beautiful numbers
文章浏览阅读3.8k次,点赞2次,收藏7次。报错:RuntimeError: multi-target not supported at /pytorch/aten/src/THCUNN/generic/ClassNLLCriterion.cu:15原因:使用nn.CrossEntropyLoss时,label必须是[0, #classes] 区间的一个数字,而不可以是one-hot encoded 目标向量当你的l..._crossentropyloss runtimeerror: multi-target not supported at /pytorch/aten/s
文章浏览阅读102次。这里写目录标题1、I2C通信协议简介2、基于AH20的温湿度传感器的数据采集1、I2C通信协议简介I2C 通讯协议是由 Phiilps公司开发的,由于它引脚少,硬件实 现简单,可扩展性强,不需要 USART、CAN 等通讯协议的外部收发设备,现在被广泛地 使用在系统内多个集成电路(IC)间的通讯。在计算机科学里,大部分复杂的问题都可以通过分层来简化。如芯片被分为内核层和 片上外设;STM32 标准库则是在寄存器与用户代码之间的软件层。对于通讯协议,我们也 以分层的方式来理解,最基本的是把它分为物理层和