20240108移远的4G模块EC20在Firefly的AIO-3399J开发板的Android11下调通的步骤_init: control message: processed ctl.interface_sta-程序员宅基地
20240108移远的4G模块EC20在Firefly的AIO-3399J开发板的Android11下调通的步骤
2024/1/8 17:50
缘起：使用友善之臂的Android11可以让EC20上网，但是同样的修改步骤，Toybrick的Android11不能让EC20上网。
最后确认是selinux的问题！
开发板：Firefly的AIO-3399J【RK3399】
SDK：rk3399-android-11-r20211216.tar.xz【Android11】
Android11.0.tar.bz2.aa【ToyBrick】
Android11.0.tar.bz2.ab
Android11.0.tar.bz2.ac
https://wiki.t-firefly.com/AIO-3399J/prepare_compile_android.html
AIO-3399J产品规格书 立即购买
AIO-3399J 采用 RK3399 六核(A72x2+A53x4) 64 位处理器，主频高达1.8GHz，集成了四核 Mali-T860 GPU，性能优异。
0、简略步骤：
rootroot@rootroot-X99-Turbo:~/3TB$ cat Android11.0.tar.bz2.a* > Android11.0.tar.bz2
rootroot@rootroot-X99-Turbo:~/3TB$ tar jxvf Android11.0.tar.bz2
rootroot@rootroot-X99-Turbo:~/3TB$ mv Android11.0 64rk3399-android-11
rootroot@rootroot-X99-Turbo:~/3TB$ cd 64rk3399-android-11
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ cd u-boot
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/u-boot$ ./make.sh rk3399
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/u-boot$ cd ..
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ cd kernel/
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/kernel$ make ARCH=arm64 rockchip_defconfig android-11.config -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/kernel$ make ARCH=arm64 BOOT_IMG=../rockdev/Image-rk3399_Android11/boot.img rk3399-sapphire-excavator-edp-avb.img -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ source build/envsetup.sh
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ lunch
36. rk3399_Android11-userdebug
Which would you like? [aosp_arm-eng] 36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ make -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ ./build.sh -u
1、
Android11 + Kernel所需要修改的文件：
1、【完全一致/相同】
Z:\rk3399-android-11\device\rockchip\common\4g_modem\manifest.xml
2、复制库文件：
chat
dhcpcd
ip-down
ip-up
libmeig-ril.so
libquec-ril.so
libreference-ril-62.so
libreference-ril.so
Z:\rk3399-android-11\device\rockchip\common\ec20\chat
Z:\rk3399-android-11\device\rockchip\common\ec20\dhcpcd
Z:\rk3399-android-11\device\rockchip\common\ec20\ip-down
Z:\rk3399-android-11\device\rockchip\common\ec20\ip-up
Z:\rk3399-android-11\device\rockchip\common\ec20\libmeig-ril.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libquec-ril.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libreference-ril-62.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libreference-ril.so
3、
Z:\rk3399-android-11\device\rockchip\common\BoardConfig.mk
4、
Z:\rk3399-android-11\device\rockchip\common\device.mk
5、
Z:\rk3399-android-11\device\rockchip\common\ueventd.rockchip.rc
6、
Z:\rk3399-android-11\device\rockchip\rk3399\rk3399_Android11\overlay\frameworks\base\core\res\res\values\config.xml
【不用修改】
Z:\rk3399-android-11\device\rockchip\rk3399\device.mk
7、
Z:\rk3399-android-11\kernel\drivers\net\usb\Makefile
Z:\rk3399-android-11\kernel\drivers\net\usb\qmi_wwan_q.c
8、
Z:\rk3399-android-11\kernel\drivers\usb\serial\option.c
【几乎没有改动】
Z:\rk3399-android-11\kernel\drivers\usb\serial\qcserial.c
Z:\rk3399-android-11\kernel\drivers\usb\serial\usb_wwan.c
9、
Z:\rk3399-android-11\system\core\init\devices.cpp
2、关闭selinux有效，关闭selinux之后就可以通过4G上网了！
Microsoft Windows [版本 10.0.19045.2311]
(c) Microsoft Corporation。保留所有权利。
C:\Users\Administrator>adb shell
* daemon not running; starting now at tcp:5037
* daemon started successfully
rk3399_Android11:/ $ su
rk3399_Android11:/ #
rk3399_Android11:/ # getenforce
Enforcing
rk3399_Android11:/ #
rk3399_Android11:/ # setenforce 0
rk3399_Android11:/ #
rk3399_Android11:/ # getenforce
Permissive
rk3399_Android11:/ #
rk3399_Android11:/ #
C:\Users\Administrator>
3、LOG：
[ 201.121383] type=1400 audit(1704718461.520:163): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 201.993162] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 202.995526] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 203.997373] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 204.121623] type=1400 audit(1704718464.520:164): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 204.999604] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 206.001804] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 207.003569] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 207.122334] type=1400 audit(1704718467.520:165): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 208.005888] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 209.007776] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 210.009581] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 210.122900] type=1400 audit(1704718470.520:166): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 211.012147] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 212.014224] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 213.015883] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 213.123345] type=1400 audit(1704718473.520:167): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 214.018871] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 215.021195] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 216.022922] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 216.124206] type=1400 audit(1704718476.523:168): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 217.024564] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 218.026307] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 219.028695] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 219.125034] type=1400 audit(1704718479.523:169): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 220.031253] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 220.971414] type=1404 audit(1704718481.366:170): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[ 221.032744] selinux: avc: received setenforce notice (enforcing=0)
[ 221.032806] selinux:
[ 221.033356] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 222.035068] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[ 222.125495] type=1400 audit(1704718482.523:171): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 222.125680] type=1400 audit(1704718482.523:172): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 222.126277] type=1400 audit(1704718482.523:173): avc: denied { ioctl } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=22919 ioctlcmd=0x5401 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 223.457184] type=1400 audit(1704718483.853:174): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 223.457386] type=1400 audit(1704718483.853:175): avc: denied { open } for comm="[email protected]" path="/sys/kernel/debug/mali0/ctx/861_2/mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 223.457773] type=1400 audit(1704718483.853:176): avc: denied { getattr } for comm="[email protected]" path="/sys/kernel/debug/mali0/ctx/861_2/mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 224.941631] type=1400 audit(1704718485.340:177): avc: denied { read write } for comm="rild" name="cdc-wdm0" dev="tmpfs" ino=22921 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 224.941869] type=1400 audit(1704718485.340:178): avc: denied { open } for comm="rild" path="/dev/cdc-wdm0" dev="tmpfs" ino=22921 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 225.421034] type=1400 audit(1704718485.816:179): avc: denied { write } for comm="Binder:245_5" name="mtu" dev="sysfs" ino=30076 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 225.421399] type=1400 audit(1704718485.816:180): avc: denied { open } for comm="Binder:245_5" path="/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.7/2-1.7:1.4/net/wwan0/mtu" dev="sysfs" ino=30076 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 225.481568] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/system/etc/init/hw/init.rc:994)
[ 244.316969] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 250.742606] type=1400 audit(1704718511.140:181): avc: denied { read } for comm="Binder:178_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[ 250.742843] type=1400 audit(1704718511.140:182): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/virtual/power_supply/test_battery/wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[ 250.743723] type=1400 audit(1704718511.140:183): avc: denied { read } for comm="Binder:178_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 250.743834] type=1400 audit(1704718511.140:184): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 250.744014] type=1400 audit(1704718511.140:185): avc: denied { read } for comm="Binder:178_2" name="event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 250.744130] type=1400 audit(1704718511.140:186): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 250.744246] type=1400 audit(1704718511.140:187): avc: denied { getattr } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
console:/ $
console:/ $ su
console:/ #
console:/ #
4、根据经验干掉/拿掉多余的so文件，无效！
Z:\3TB\76Android11.0\device\rockchip\rk3399\device.mk
#
#add Rockchip properties here
#
PRODUCT_PROPERTY_OVERRIDES += \
ro.ril.ecclist=112,911 \
ro.opengles.version=196610 \
wifi.interface=wlan0 \
# ro.telephony.default_network=9 \
# rild.libpath=/vendor/lib64/libquectel-ril.so \
# rild.libargs=-d /dev/ttyUSB0 \
persist.tegra.nvmmlite = 1 \
ro.audio.monitorOrientation=true \
debug.nfc.fw_download=false \
debug.nfc.se=false \
ro.rk.screenoff_time=60000 \
ro.rk.screenshot_enable=true \
ro.rk.def_brightness=200 \
ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home \
ro.rk.install_non_market_apps=false \
vendor.hwc.compose_policy=6 \
sys.wallpaper.rgb565=0 \
sf.power.control=2073600 \
sys.rkadb.root=0 \
ro.sf.fakerotation=false \
ro.sf.hwrotation=0 \
ro.rk.MassStorage=false \
ro.rk.systembar.voiceicon=true \
ro.rk.systembar.tabletUI=false \
ro.rk.LowBatteryBrightness=false \
ro.tether.denied=false \
sys.resolution.changed=false \
ro.default.size=100 \
ro.product.usbfactory=rockchip_usb \
wifi.supplicant_scan_interval=15 \
ro.factory.tool=0 \
ro.kernel.android.checkjni=0 \
ro.build.shutdown_timeout=6 \
persist.enable_task_snapshots=false
修改为：
#
#add Rockchip properties here
#
PRODUCT_PROPERTY_OVERRIDES += \
ro.ril.ecclist=112,911 \
ro.opengles.version=196610 \
wifi.interface=wlan0 \
#rild.libpath=/vendor/lib64/libril-rk29-dataonly.so \
#rild.libargs=-d /dev/ttyACM0 \
persist.tegra.nvmmlite = 1 \
ro.audio.monitorOrientation=true \
debug.nfc.fw_download=false \
debug.nfc.se=false \
ro.rk.screenoff_time=60000 \
ro.rk.screenshot_enable=true \
ro.rk.def_brightness=200 \
ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home \
ro.rk.install_non_market_apps=false \
vendor.hwc.compose_policy=6 \
sys.wallpaper.rgb565=0 \
sf.power.control=2073600 \
sys.rkadb.root=0 \
ro.sf.fakerotation=false \
ro.sf.hwrotation=0 \
ro.rk.MassStorage=false \
ro.rk.systembar.voiceicon=true \
ro.rk.systembar.tabletUI=false \
ro.rk.LowBatteryBrightness=false \
ro.tether.denied=false \
sys.resolution.changed=false \
ro.default.size=100 \
ro.product.usbfactory=rockchip_usb \
wifi.supplicant_scan_interval=15 \
ro.factory.tool=0 \
ro.kernel.android.checkjni=0 \
ro.sf.lcd_density=280 \
ro.build.shutdown_timeout=6 \
persist.enable_task_snapshots=false
5、【关闭多余的打印LOG】无效
BING搜索：init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
https://bbs.elecfans.com/jishu_2263076_1_1.html
[问答] 如何调试RK3568-ANDROID11-4G-EC20？
RK3568/system/core/init/init.cpp
+ if(strcmp(name.c_str(),"[email protected]::IRadio/slot1") != 0) {
LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
<< "' from pid: " << from_pid << " (" << process_cmdline << ")";
+ }
https://www.cnblogs.com/wmc245376374/p/17918630.html
3568 EC25-G调试4G和GPS功能
9.没接4G模块时候，一直报错：
init: Control message: Could not find '[email protected]::IRadio/slot1' for ctl.interface_start from pid: 149 (/system/bin/hwservicemanager)
需要修改以下2点：
a.system/core/
diff --git a/init/init.cpp b/init/init.cpp
old mode 100644
new mode 100755
index 29859c5..ff83b9f
--- a/init/init.cpp
+++ b/init/init.cpp
@@ -421,9 +421,11 @@ static bool HandleControlMessage(std::string_view message, const std::string& na
return false;
}
- LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
- << "' from pid: " << from_pid << " (" << process_cmdline << ")";
- return true;
+ if(strcmp(name.c_str(),"[email protected]::IRadio/slot1") != 0) {
+ LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
+ << "' from pid: " << from_pid << " (" << process_cmdline << ")";
+ }
+ return true;
}
b./system/libhidl
LOG：
[ 12.856211] read descriptors
[ 12.856246] read strings
[ 12.857072] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/system/etc/init/hw/init.usb.configfs.rc:20)
[ 12.858924] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/system/etc/init/hw/init.usb.configfs.rc:22) took 0ms and failed: symlink() failed: File exists
[ 12.960543] dwc3 fe800000.dwc3: device reset
[ 12.960749] android_work: did not send uevent (0 0 (null))
[ 13.062612] android_work: sent uevent USB_STATE=CONNECTED
[ 13.151964] configfs-gadget gadget: high-speed config #1: b
[ 13.152205] android_work: sent uevent USB_STATE=CONFIGURED
[ 13.549802] init: Control message: Processed ctl.start for 'idmap2d' from pid: 452 (system_server)
[ 14.233461] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 14.244322] type=1400 audit(1704719876.640:32): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 14.244619] type=1400 audit(1704719876.640:33): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.244761] type=1400 audit(1704719876.640:34): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.244857] type=1400 audit(1704719876.640:35): avc: denied { read } for comm="Binder:180_2" name="wakeup5" dev="sysfs" ino=21204 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.244946] type=1400 audit(1704719876.640:36): avc: denied { read } for comm="Binder:180_2" name="wakeup10" dev="sysfs" ino=22502 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 14.245038] type=1400 audit(1704719876.640:37): avc: denied { read } for comm="Binder:180_2" name="wakeup8" dev="sysfs" ino=22362 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 14.245149] type=1400 audit(1704719876.640:38): avc: denied { read } for comm="Binder:180_2" name="wakeup6" dev="sysfs" ino=21773 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.247181] type=1400 audit(1704719876.640:39): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 14.247488] type=1400 audit(1704719876.640:40): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.247669] type=1400 audit(1704719876.640:41): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 14.689286] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/system/etc/init/hw/init.rc:990)
[ 14.691478] Freeing drm_logo memory: 732K
[ 20.514310] read descriptors
[ 20.514360] read strings
[ 20.514446] read descriptors
[ 20.514474] read strings
[ 20.839932] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 20.851128] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 20.851154] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 20.851327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.877753] type=1400 audit(1704719883.273:48): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 20.878726] type=1400 audit(1704719883.273:49): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 20.878860] type=1400 audit(1704719883.273:50): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 20.879149] type=1400 audit(1704719883.273:51): avc: denied { read } for comm="Binder:180_2" name="wakeup5" dev="sysfs" ino=21204 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 20.879242] type=1400 audit(1704719883.273:52): avc: denied { read } for comm="Binder:180_2" name="wakeup10" dev="sysfs" ino=22502 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 20.881150] type=1400 audit(1704719883.276:53): avc: denied { read } for comm="Binder:180_2" name="wakeup8" dev="sysfs" ino=22362 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[ 20.881862] type=1400 audit(1704719883.276:54): avc: denied { read } for comm="Binder:180_2" name="wakeup6" dev="sysfs" ino=21773 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[ 21.189375] type=1400 audit(1704719883.583:55): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 21.356439] type=1400 audit(1704719883.750:56): avc: denied { read } for comm="[email protected]" name="u:object_r:default_prop:s0" dev="tmpfs" ino=19478 scontext=u:r:mediacodec:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[ 21.356666] type=1400 audit(1704719883.750:57): avc: denied { read } for comm="[email protected]" name="u:object_r:default_prop:s0" dev="tmpfs" ino=19478 scontext=u:r:mediacodec:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[ 24.218082] init: Sending signal 9 to service 'idmap2d' (pid 354) process group...
[ 24.224159] libprocessgroup: Successfully killed process cgroup uid 1000 pid 354 in 5ms
[ 24.225204] init: Control message: Processed ctl.stop for 'idmap2d' from pid: 452 (system_server)
[ 24.225671] init: Service 'idmap2d' (pid 354) received signal 9
[ 25.137834] init: Service 'bootanim' (pid 183) exited with status 0 oneshot service took 21.811001 seconds in background
[ 25.137876] init: Sending signal 9 to service 'bootanim' (pid 183) process group...
[ 25.138085] libprocessgroup: Successfully killed process cgroup uid 1003 pid 183 in 0ms
[ 25.265153] init: processing action (sys.boot_completed=1) from (/system/etc/init/hw/init.rc:981)
[ 25.265762] init: starting service 'exec 14 (/bin/rm -rf /data/per_boot)'...
[ 25.268753] init: SVC_EXEC service 'exec 14 (/bin/rm -rf /data/per_boot)' pid 1188 (uid 1000 gid 1000+0 context default) started; waiting...
[ 25.662535] zram0: detected capacity change from 0 to 1022517248
[ 25.679252] mkswap: Swapspace size: 998548k, UUID=cf708506-1a49-4d1c-8691-8ca4e2e4825c
[ 25.684826] Adding 998548k swap on /dev/block/zram0. Priority:-2 extents:1 across:998548k SS
[ 25.932097] type=1400 audit(1704719888.326:94): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=26302 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 25.994079] type=1400 audit(1704719888.386:95): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 27.190413] type=1400 audit(1704719889.583:96): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 30.190693] type=1400 audit(1704719892.583:97): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 32.053976] vcc_mipi: disabling
[ 33.190870] type=1400 audit(1704719895.583:98): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 34.777751] type=1400 audit(1704719897.173:99): avc: denied { read } for comm=".update.service" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=19564 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=0
[ 34.778341] type=1400 audit(1704719897.173:100): avc: denied { read } for comm=".update.service" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=19564 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=0
[ 36.194855] type=1400 audit(1704719898.586:101): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 39.195767] type=1400 audit(1704719901.590:102): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 42.195747] type=1400 audit(1704719904.590:103): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 44.448890] type=1400 audit(1704719906.843:104): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=37048 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 45.196695] type=1400 audit(1704719907.590:105): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 48.197413] type=1400 audit(1704719910.593:106): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 50.522401] type=1400 audit(1704719912.916:107): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=26302 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 51.197961] type=1400 audit(1704719913.593:108): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 54.198766] type=1400 audit(1704719916.593:109): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 54.475676] type=1400 audit(1704719916.870:110): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=37048 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 57.199558] type=1400 audit(1704719919.593:111): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 60.200363] type=1400 audit(1704719922.596:112): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[ 60.974708] type=1404 audit(1704719923.370:113): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[ 61.295274] selinux: avc: received setenforce notice (enforcing=0)
[ 61.295331] selinux:
[ 63.201013] type=1400 audit(1704719925.593:114): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 63.201447] type=1400 audit(1704719925.596:115): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 63.202511] type=1400 audit(1704719925.596:116): avc: denied { ioctl } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 ioctlcmd=0x5401 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 64.032494] type=1400 audit(1704719926.426:117): avc: denied { read } for comm="[email protected]" name="mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 64.032728] type=1400 audit(1704719926.426:118): avc: denied { open } for comm="[email protected]" path="/sys/kernel/debug/mali0/ctx/675_3/mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 64.032840] type=1400 audit(1704719926.426:119): avc: denied { getattr } for comm="[email protected]" path="/sys/kernel/debug/mali0/ctx/675_3/mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 66.449483] type=1400 audit(1704719928.843:120): avc: denied { read write } for comm="rild" name="cdc-wdm0" dev="tmpfs" ino=3651 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 66.449648] type=1400 audit(1704719928.843:121): avc: denied { open } for comm="rild" path="/dev/cdc-wdm0" dev="tmpfs" ino=3651 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 66.929972] type=1400 audit(1704719929.323:122): avc: denied { write } for comm="Binder:253_3" name="mtu" dev="sysfs" ino=29983 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 66.930337] type=1400 audit(1704719929.323:123): avc: denied { open } for comm="Binder:253_3" path="/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.7/2-1.7:1.4/net/wwan0/mtu" dev="sysfs" ino=29983 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 66.966307] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/system/etc/init/hw/init.rc:994)
[ 67.605382] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 92.229023] type=1400 audit(1704719954.623:124): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[ 92.229257] type=1400 audit(1704719954.623:125): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/virtual/power_supply/test_battery/wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[ 92.230450] type=1400 audit(1704719954.623:126): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 92.230755] type=1400 audit(1704719954.623:127): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 92.230933] type=1400 audit(1704719954.623:128): avc: denied { read } for comm="Binder:180_2" name="event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 92.231070] type=1400 audit(1704719954.623:129): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 92.231207] type=1400 audit(1704719954.623:130): avc: denied { getattr } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
console:/ $
console:/ $
console:/ $
6、打开USB串口/dev/ttyUSB2的权限：无效
Z:\3TB\76Android11.0\device\rockchip\common\ueventd.rockchip.rc
#for hid audio
/dev/hidraw0 0660 audio audio
# for serial
/dev/ttyS4 0660 system system
#for ec20 modem 2024/1/5 22:25
# for radio
/dev/ttyUSB* 0660 radio radio
/dev/ttyACM* 0666 radio radio
/dev/cdc-wdm* 0666 radio radio
/dev/qcqmi* 0660 radio radio
#for ec20 modem 2024/1/5 22:25
# for mali-t764
/dev/mali0 0666 system system
修改为：
#for hid audio
/dev/hidraw0 0660 audio audio
#for ec20 modem 2024/1/5 22:25
# for radio
/dev/ttyUSB0 0660 radio radio
/dev/ttyUSB1 0660 radio radio
/dev/ttyUSB2 0777 radio radio
/dev/ttyUSB3 0660 radio radio
/dev/ttyUSB4 0660 radio radio
/dev/ttyUSB5 0660 radio radio
/dev/ttyUSB6 0660 radio radio
/dev/ttyUSB7 0660 radio radio
/dev/ttyUSB8 0660 radio radio
/dev/ttyUSB9 0660 radio radio
/dev/ttyACM* 0666 radio radio
/dev/cdc-wdm* 0666 radio radio
/dev/qcqmi* 0660 radio radio
#for ec20 modem 2024/1/5 22:25
# for mali-t764
/dev/mali0 0666 system system
[ 63.201013] type=1400 audit(1704719925.593:114): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[ 63.201447] type=1400 audit(1704719925.596:115): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
7、继续跟踪在 今日头条搜索：RK3399 EC20 ttyUSB0
基本可以确认是selinux的问题！
通过adb/串口配置selinux即可上网了！
https://blog.csdn.net/ezconn/article/details/108351278?spm=1001.2101.3001.6650.14&utm_medium=distribute.wap_relevant.none-task-blog-2~default~BlogCommendFromBaidu~Rate-14-108351278-blog-118994932.237%5Ev3%5Ewap_relevant_t0_download&depth_1-utm_source=distribute.wap_relevant.none-task-blog-2~default~BlogCommendFromBaidu~Rate-14-108351278-blog-118994932.237%5Ev3%5Ewap_relevant_t0_download&share_token=88af91e9-96e5-47ed-b029-1bee0141bab2
https://blog.csdn.net/ezconn/article/details/108351278
Android 串口打开失败几种原因及解决办法
串口打开失败目前遇到以下几种问题：
第一个问题
问题：点击Setup闪退，如果是NullPointerException异常，主要是获取dev目录下的设备号为空；或者说获取的设备号数组为空；获取不到串口号；
可能引起的原因：Android系统防火墙打开了，所以需要关闭；具体步骤如下
解决方法：
a，cmd 中输入adb root 获取root权限
b，adb remount （有的不需要执行这条命令）
c，adb shell
d，setenforce 0 关闭防火墙(注意：重启后失效，需重新设置)
e，getenforce 查看当前权限状态
8、【友善之臂的Android11的SDK：rk3399-android-11-r20211216.tar.xz不需要关闭selinux既可以跑通EC20的4G上网！】
关闭selinux会导致系统起不来！原因不明。
极其可能与Firefly在uboot中配置optee有关系！押后处理！
Z:\3TB\76Android11.0\device\rockchip\common\BoardConfig.mk
# Enable android verified boot 2.0
BOARD_AVB_ENABLE ?= false
BOARD_BOOT_HEADER_VERSION ?= 2
BOARD_MKBOOTIMG_ARGS :=
BOARD_PREBUILT_DTBOIMAGE ?= $(TARGET_DEVICE_DIR)/dtbo.img
BOARD_ROCKCHIP_VIRTUAL_AB_ENABLE ?= false
BOARD_SELINUX_ENFORCING ?= true
修改为：
# Enable android verified boot 2.0
BOARD_AVB_ENABLE ?= false
BOARD_BOOT_HEADER_VERSION ?= 2
BOARD_MKBOOTIMG_ARGS :=
BOARD_PREBUILT_DTBOIMAGE ?= $(TARGET_DEVICE_DIR)/dtbo.img
BOARD_ROCKCHIP_VIRTUAL_AB_ENABLE ?= false
BOARD_SELINUX_ENFORCING ?= false
出错的LOG：
U-Boot 2017.09 (Jan 07 2024 - 22:03:00 +0800)
Model: Rockchip RK3399 Evaluation Board
PreSerial: 2, raw, 0xff1a0000
DRAM: 2 GiB
Sysmem: init
Relocation Offset: 7db7a000
Relocation fdt: 7bd6e2d0 - 7bd70ceb
CR: M/C/I
Using default environment
dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: normal
Android 11.0, Build 2021.6, v2
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC: RK808
vdd_center 900000 uV
vdd_cpu_l 1075000 uV
vdd_log 1100000 uV
Model: Rockchip RK3399 Excavator Board edp avb (Android)
Rockchip UBOOT DRM driver version: v1.0.1
disp info 0, type:11, id:0
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
base_parameter.mode:1920x1080
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 100a
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
Using display timing dts
Detailed mode clock 200000 kHz, flags[a]
H: 1536 1548 1564 1612
V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
failed to get Rx Max Link Rate
failed to init training
unable to do link train
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 856000 KHz
cpll 200000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 148000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): 0
emmc boot
No FDT memory address configured. Default at 0x08300000
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
lzf debug,store_value=Rockchip RK3399 Excavator Board edp avb (Android)
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:762: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
get image from preloaded partition...
Could not find "system" partition
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...
Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 31031 KiB
RAM disk load addr 0x0a200000 size 819 KiB
## Flattened Device Tree blob at 0x08300000
Booting using the fdt blob at 0x08300000
XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
'reserved-memory' ramoops@110000: addr=110000 size=f0000
Using Device Tree in place at 0000000008300000, end 000000000831dead
failed to reserve drm-cubic-lut memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 1209.550 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.193 (rootroot@rootroot-X99-Turbo) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05), GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024
[ 0.000000] Machine model: Rockchip RK3399 Excavator Board edp avb (Android)
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 24 pages/cpu s58968 r8192 d31144 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507912
[ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtb_idx=0 androidboot.dtbo_idx=0 androidboot.verifiedbootstate=orange androidboot.slot_suffix= androidboot.serialno=62089c75a9d193d6 console=ttyFIQ0 androidboot.baseband=N/A androidboot.wificountrycode=CN androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 androidboot.verifiedbootstate=orange firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.selinux=permissive buildvariant=userdebug earlycon=uart8250,mmio32,0xff1a0000 coherent_pool=1m androidboot.boot_devices=fe330000.sdhci
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1975012K/2064384K available (15422K kernel code, 2102K rwdata, 9280K rodata, 4160K init, 2198K bss, 72988K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @a300000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x0000000000270000
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a380000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x4f0 with crng_init=0
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002040] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.003016] pid_max: default: 32768 minimum: 301
[ 0.003592] Security Framework initialized
[ 0.003987] SELinux: Initializing.
[ 0.004429] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.005071] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.007371] ASID allocator initialised with 32768 entries
[ 0.007987] rcu: Hierarchical SRCU implementation.
[ 0.008876] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.010079] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.011717] smp: Bringing up secondary CPUs ...
[ 0.012770] Detected VIPT I-cache on CPU1
[ 0.012809] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.012854] CPU1: using LPI pending table @0x000000007e110000
[ 0.012905] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.013732] Detected VIPT I-cache on CPU2
[ 0.013770] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.013815] CPU2: using LPI pending table @0x000000007e160000
[ 0.013865] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014678] Detected VIPT I-cache on CPU3
[ 0.014714] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.014758] CPU3: using LPI pending table @0x000000007e190000
[ 0.014808] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.015641] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.015647] CPU features: enabling workaround for EL2 vector hardening
[ 0.015656] Detected PIPT I-cache on CPU4
[ 0.015681] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.015737] CPU4: using LPI pending table @0x000000007e1e0000
[ 0.015771] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.016532] Detected PIPT I-cache on CPU5
[ 0.016559] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.016614] CPU5: using LPI pending table @0x000000007e1f0000
[ 0.016648] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.016757] smp: Brought up 1 node, 6 CPUs
[ 0.029306] SMP: Total of 6 processors activated.
[ 0.029754] CPU features: detected: GIC system register CPU interface
[ 0.030382] CPU features: detected: 32-bit EL0 Support
[ 0.036877] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.037683] CPU: All CPU(s) started at EL2
[ 0.038108] alternatives: patching kernel code
[ 0.039960] devtmpfs: initialized
[ 0.054519] Trying to unpack rootfs image as initramfs...
[ 0.055036] Registered cp15_barrier emulation handler
[ 0.055522] Registered setend emulation handler
[ 0.056319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.057238] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.058193] pinctrl core: initialized pinctrl subsystem
[ 0.059488] NET: Registered protocol family 16
[ 0.062809] schedtune: configured to support 6 boost groups
[ 0.063634] audit: initializing netlink subsys (disabled)
[ 0.065217] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[ 0.066042] cpuidle: using governor menu
[ 0.066425] Registered FIQ tty driver
[ 0.067349] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.080381] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.084210] console [pstore-1] enabled
[ 0.084709] pstore: Registered ramoops as persistent store backend
[ 0.085292] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.097453] Freeing initrd memory: 816K
[ 0.104399] rockchip-gpio ff720000.gpio0: probed gpio0 (ff720000.gpio0)
[ 0.105359] rockchip-gpio ff730000.gpio1: probed gpio1 (ff730000.gpio1)
[ 0.106312] rockchip-gpio ff780000.gpio2: probed gpio2 (ff780000.gpio2)
[ 0.107273] rockchip-gpio ff788000.gpio3: probed gpio3 (ff788000.gpio3)
[ 0.108339] rockchip-gpio ff790000.gpio4: probed gpio4 (ff790000.gpio4)
[ 0.109016] rockchip-pinctrl pinctrl: probed pinctrl
[ 0.118196] cryptd: max_cpu_qlen set to 1000
[ 0.119613] fiq debugger fiq mode enabled
[[ 0.120209] console [ttyFIQ0] enabled
0.120209] console [ttyFIQ0] enabled
[ 0.120880] bootconsole [uart8250] disabled
[ 0.120880] bootconsole [uart8250] disabled
[ 0.121419] Registered fiq debugger ttyFIQ0
[ 0.121977] vcc1v8_s3: regulator get failed, ret=-517
[ 0.122221] vcc3v0_sd: regulator get failed, ret=-517
[ 0.122408] vcc3v3_sys: regulator get failed, ret=-517
[ 0.122587] vcc_sys: supplied by dc_12v
[ 0.122906] vcc5v0_host: supplied by vcc_sys
[ 0.122995] vcc3v3_sys: supplied by vcc_sys
[ 0.123035] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.150481] vcc_lcd: supplied by vcc5v0_sys
[ 0.151192] rk_iommu ff650800.iommu: version = 1
[ 0.151596] rk_iommu ff660480.iommu: version = 1
[ 0.151853] rk_iommu ff670800.iommu: version = 1
[ 0.152119] rk_iommu ff8f3f00.iommu: version = 1
[ 0.152319] rk_iommu ff903f00.iommu: version = 1
[ 0.152513] rk_iommu ff914000.iommu: version = 1
[ 0.152758] rk_iommu ff924000.iommu: version = 1
[ 0.153262] SCSI subsystem initialized
[ 0.153423] usbcore: registered new interface driver usbfs
[ 0.153462] usbcore: registered new interface driver hub
[ 0.153501] usbcore: registered new device driver usb
[ 0.153751] media: Linux media interface: v0.10
[ 0.153783] videodev: Linux video capture interface: v2.00
[ 0.153839] pps_core: LinuxPPS API ver. 1 registered
[ 0.153851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.153866] PTP clock support registered
[ 0.155676] Advanced Linux Sound Architecture Driver Initialized.
[ 0.155988] Bluetooth: Core ver 2.22
[ 0.156025] NET: Registered protocol family 31
[ 0.156038] Bluetooth: HCI device and connection manager initialized
[ 0.156050] Bluetooth: HCI socket layer initialized
[ 0.156063] Bluetooth: L2CAP socket layer initialized
[ 0.156096] Bluetooth: SCO socket layer initialized
[ 0.156444] rockchip-cpuinfo cpuinfo: SoC : 0
[ 0.156461] rockchip-cpuinfo cpuinfo: Serial : 62089c75a9d193d6
[ 0.157169] clocksource: Switched to clocksource arch_sys_counter
[ 0.214225] VFS: Disk quotas dquot_6.6.0
[ 0.214305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.215595] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.215814] NET: Registered protocol family 2
[ 0.216296] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.216345] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.216493] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.216748] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.216854] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.216912] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.217067] NET: Registered protocol family 1
[ 0.219158] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.219446] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.220833] Initialise system trusted keyrings
[ 0.221001] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.224890] utf8_selftest: All 154 tests passed
[ 0.224908] fuse init (API version 7.27)
[ 0.225943]
[ 0.225943] TEE Core Framework initialization (ver 1:0.1)
[ 0.225968] TEE armv7 Driver initialization
[ 0.226328] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.226345] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 0.226496] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 0.227616] Key type asymmetric registered
[ 0.227632] Asymmetric key parser 'x509' registered
[ 0.227668] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.227682] io scheduler noop registered
[ 0.227782] io scheduler cfq registered (default)
[ 0.227796] io scheduler mq-deadline registered
[ 0.227804] io scheduler kyber registered
[ 0.227874] io scheduler bfq registered
[ 0.229468] phy phy-ff770000.syscon:[email protected]: Linked as a consumer to regulator.6
[ 0.229820] phy phy-ff770000.syscon:[email protected]: No vbus specified for otg port
[ 0.230964] phy phy-ff770000.syscon:[email protected]: Linked as a consumer to regulator.6
[ 0.231262] phy phy-ff770000.syscon:[email protected]: No vbus specified for otg port
[ 0.232674] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: invalid resource
[ 0.235825] rockchip-pcie f8000000.pcie: missing "memory-region" property
[ 0.235958] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 0.235981] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.236002] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.236022] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 0.236046] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 0.236070] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 0.236087] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[ 0.787208] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 0.787233] rockchip-pcie f8000000.pcie: deferred probe failed
[ 0.787318] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 0.787943] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[ 0.788009] pwm-backlight backlight: Linked as a consumer to regulator.0
[ 0.788300] iommu: Adding device ff670000.iep to group 2
[ 0.788327] iep ff670000.iep: Linked as a consumer to ff670800.iommu
[ 0.788487] iep: failed to find iep power down clock source.
[ 0.788789] iep: IEP Power ON
[ 0.788827] iep: IEP Power OFF
[ 0.788893] iep: IEP Driver loaded succesfully
[ 0.789054] iep: Module initialized.
[ 0.789175] mpp_service mpp-srv: unknown mpp version for missing VCS info
[ 0.789185] mpp_service mpp-srv: probe start
[ 0.789515] iommu: Adding device ff660000.rkvdec to group 1
[ 0.789547] mpp_rkvdec ff660000.rkvdec: Linked as a consumer to ff660480.iommu
[ 0.789724] mpp_rkvdec ff660000.rkvdec: probing start
[ 0.790078] rkvdec_init:1219: failed on clk_get clk_hevc_cabac
[ 0.790188] mpp_rkvdec ff660000.rkvdec: shared_video_hevc_cabac is not found!
[ 0.790210] rkvdec_init:1250: No hevc cabac reset resource define
[ 0.790415] mpp_rkvdec ff660000.rkvdec: probing finish
[ 0.791844] iommu: Adding device ff650400.vdpu to group 0
[ 0.791876] mpp_vdpu2 ff650400.vdpu: Linked as a consumer to ff650800.iommu
[ 0.792126] mpp_vdpu2 ff650400.vdpu: probe device
[ 0.792461] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[ 0.792484] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[ 0.792672] mpp_vdpu2 ff650400.vdpu: probing finish
[ 0.793085] iommu: Adding device ff650000.vepu to group 0
[ 0.793132] mpp_vepu2 ff650000.vepu: Linked as a consumer to ff650800.iommu
[ 0.793186] mpp_vepu2 ff650000.vepu: probe device
[ 0.793578] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[ 0.793596] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[ 0.793785] mpp_vepu2 ff650000.vepu: probing finish
[ 0.794601] mpp_service mpp-srv: probe success
[ 0.797785] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.797807] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.799347] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.799371] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.800757] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 0.801354] vdd_log: supplied by regulator-dummy
[ 0.801957] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.802639] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.804638] random: fast init done
[ 0.804920] random: crng init done
[ 0.804935] iommu: Adding device ff8f0000.vop to group 3
[ 0.804978] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
[ 0.805275] iommu: Adding device ff900000.vop to group 4
[ 0.805309] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
[ 0.809533] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[ 0.809574] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[ 0.810549] rockchip-drm display-subsystem: Linked as a consumer to ff970000.edp
[ 0.811042] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[ 0.818140] panel-simple panel: Linked as a consumer to regulator.8
[ 0.818186] panel-simple panel: panel supply vsp not found, using dummy regulator
[ 0.818245] panel-simple panel: Linked as a consumer to regulator.0
[ 0.818274] panel-simple panel: panel supply vsn not found, using dummy regulator
[ 0.819247] midgard ff9a0000.gpu: Failed to get regulator
[ 0.819268] midgard ff9a0000.gpu: Power control initialization failed
[ 0.819764] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.826744] brd: module loaded
[ 0.839389] loop: module loaded
[ 0.839714] zram: Added device: zram0
[ 0.839984] SCSI Media Changer driver v0.25
[ 0.842014] libphy: Fixed MDIO Bus: probed
[ 0.842051] tun: Universal TUN/TAP device driver, 1.6
[ 0.842667] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.842707] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available yet, deferred probing
[ 0.843334] PPP generic driver version 2.4.2
[ 0.843457] PPP BSD Compression module registered
[ 0.843471] PPP Deflate Compression module registered
[ 0.843498] PPP MPPE Compression module registered
[ 0.843508] NET: Registered protocol family 24
[ 0.843528] PPTP driver version 0.8.5
[ 0.843807] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.843818] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.843915] usbcore: registered new interface driver catc
[ 0.843952] usbcore: registered new interface driver kaweth
[ 0.843964] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.843993] usbcore: registered new interface driver pegasus
[ 0.844026] usbcore: registered new interface driver rtl8150
[ 0.844062] usbcore: registered new interface driver r8152
[ 0.844072] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.844116] usbcore: registered new interface driver hso
[ 0.844149] usbcore: registered new interface driver asix
[ 0.844182] usbcore: registered new interface driver ax88179_178a
[ 0.844214] usbcore: registered new interface driver cdc_ether
[ 0.844246] usbcore: registered new interface driver cdc_eem
[ 0.844278] usbcore: registered new interface driver dm9601
[ 0.844315] usbcore: registered new interface driver smsc75xx
[ 0.844351] usbcore: registered new interface driver smsc95xx
[ 0.844386] usbcore: registered new interface driver gl620a
[ 0.844418] usbcore: registered new interface driver net1080
[ 0.844450] usbcore: registered new interface driver plusb
[ 0.844479] usbcore: registered new interface driver rndis_host
[ 0.844512] usbcore: registered new interface driver cdc_subset
[ 0.844546] usbcore: registered new interface driver zaurus
[ 0.844582] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.844617] usbcore: registered new interface driver int51x1
[ 0.844650] usbcore: registered new interface driver kalmia
[ 0.844682] usbcore: registered new interface driver ipheth
[ 0.844715] usbcore: registered new interface driver sierra_net
[ 0.844748] usbcore: registered new interface driver cx82310_eth
[ 0.844785] usbcore: registered new interface driver cdc_ncm
[ 0.844831] usbcore: registered new interface driver qmi_wwan_q
[ 0.844864] usbcore: registered new interface driver cdc_mbim
[ 0.845735] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 0.850058] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[ 0.854792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.854809] ehci-pci: EHCI PCI platform driver
[ 0.854862] ehci-platform: EHCI generic platform driver
[ 0.858387] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.858529] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 0.858809] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 0.870528] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.870669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.870685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.870710] usb usb1: Product: EHCI Host Controller
[ 0.870721] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd
[ 0.870733] usb usb1: SerialNumber: fe380000.usb
[ 0.871138] hub 1-0:1.0: USB hub found
[ 0.871174] hub 1-0:1.0: 1 port detected
[ 0.873596] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.873756] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.874031] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 0.887194] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.887323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.887342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887362] usb usb2: Product: EHCI Host Controller
[ 0.887375] usb usb2: Manufacturer: Linux 4.19.193 ehci_hcd
[ 0.887388] usb usb2: SerialNumber: fe3c0000.usb
[ 0.887720] hub 2-0:1.0: USB hub found
[ 0.887754] hub 2-0:1.0: 1 port detected
[ 0.888260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.888288] ohci-platform: OHCI generic platform driver
[ 0.888481] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.888643] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.888840] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 0.947984] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 0.948003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.948013] usb usb3: Product: Generic Platform OHCI controller
[ 0.948022] usb usb3: Manufacturer: Linux 4.19.193 ohci_hcd
[ 0.948031] usb usb3: SerialNumber: fe3a0000.usb
[ 0.948362] hub 3-0:1.0: USB hub found
[ 0.948403] hub 3-0:1.0: 1 port detected
[ 0.948787] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.948932] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.949110] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 1.007980] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 1.007999] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008009] usb usb4: Product: Generic Platform OHCI controller
[ 1.008017] usb usb4: Manufacturer: Linux 4.19.193 ohci_hcd
[ 1.008026] usb usb4: SerialNumber: fe3e0000.usb
[ 1.008377] hub 4-0:1.0: USB hub found
[ 1.008417] hub 4-0:1.0: 1 port detected
[ 1.009446] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.009629] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[ 1.010154] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000009002030010
[ 1.010205] xhci-hcd xhci-hcd.1.auto: irq 76, io mem 0xfe900000
[ 1.010474] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.010486] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.010528] usb usb5: Product: xHCI Host Controller
[ 1.010538] usb usb5: Manufacturer: Linux 4.19.193 xhci-hcd
[ 1.010552] usb usb5: SerialNumber: xhci-hcd.1.auto
[ 1.010932] hub 5-0:1.0: USB hub found
[ 1.010981] hub 5-0:1.0: 1 port detected
[ 1.011283] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.011422] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[ 1.011453] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.011555] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.011662] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.011685] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.011706] usb usb6: Product: xHCI Host Controller
[ 1.011750] usb usb6: Manufacturer: Linux 4.19.193 xhci-hcd
[ 1.011771] usb usb6: SerialNumber: xhci-hcd.1.auto
[ 1.012111] hub 6-0:1.0: USB hub found
[ 1.012153] hub 6-0:1.0: 1 port detected
[ 1.012562] usbcore: registered new interface driver cdc_acm
[ 1.012585] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.012643] usbcore: registered new interface driver usblp
[ 1.012734] usbcore: registered new interface driver cdc_wdm
[ 1.012911] usbcore: registered new interface driver uas
[ 1.013035] usbcore: registered new interface driver usb-storage
[ 1.013087] usbcore: registered new interface driver ums-alauda
[ 1.013137] usbcore: registered new interface driver ums-cypress
[ 1.013222] usbcore: registered new interface driver ums-datafab
[ 1.013273] usbcore: registered new interface driver ums_eneub6250
[ 1.013322] usbcore: registered new interface driver ums-freecom
[ 1.013374] usbcore: registered new interface driver ums-isd200
[ 1.013461] usbcore: registered new interface driver ums-jumpshot
[ 1.013510] usbcore: registered new interface driver ums-karma
[ 1.013559] usbcore: registered new interface driver ums-onetouch
[ 1.013609] usbcore: registered new interface driver ums-sddr09
[ 1.013694] usbcore: registered new interface driver ums-sddr55
[ 1.013745] usbcore: registered new interface driver ums-usbat
[ 1.013823] usbcore: registered new interface driver usbserial_generic
[ 1.013977] usbserial: USB Serial support registered for generic
[ 1.014032] usbcore: registered new interface driver option
[ 1.014066] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.014296] usbcore: registered new interface driver trancevibrator
[ 1.014838] usbcore: registered new interface driver xpad
[ 1.014932] usbcore: registered new interface driver usb_acecad
[ 1.014986] usbcore: registered new interface driver aiptek
[ 1.015041] usbcore: registered new interface driver gtco
[ 1.015093] usbcore: registered new interface driver hanwang
[ 1.015167] usbcore: registered new interface driver kbtab
[ 1.015457] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
[ 1.015473] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
[ 1.016410] i2c /dev entries driver
[ 1.017585] input: gsl3673 as /devices/platform/ff110000.i2c/i2c-1/1-0040/input/input0
[ 1.082642] phy phy-ff770000.syscon:[email protected]: charger = USB_SDP_CHARGER
[ 1.090669] gsl3673 1-0040: GSL3673 test_i2c error!
[ 1.090728] gsl3673 1-0040: gsl_probe: init_chip failed
[ 1.091022] gsl3673: probe of 1-0040 failed with error -1
[ 1.091580] i2c i2c-1: 1 i2c clients have been registered at 0x0c
[ 1.091741] i2c i2c-1: 1 i2c clients have been registered at 0x10
[ 1.093062] rk808 0-001b: chip id: 0x0
[ 1.093167] chensq power_en_active0 is 0x0,rk808_probe--1319
[ 1.096273] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.096307] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.097007] vdd_center: supplied by vcc_sys
[ 1.097588] vdd_cpu_l: supplied by vcc_sys
[ 1.097882] vcc_ddr: supplied by vcc_sys
[ 1.098421] vcc_1v8: supplied by vcc_sys
[ 1.099094] vcc1v8_dvp: supplied by vcc_sys
[ 1.099535] vcc3v0_tp: supplied by vcc_sys
[ 1.100122] vcc1v8_pmu: supplied by vcc_sys
[ 1.100700] vcc_sdio: supplied by vcc_sys
[ 1.101103] vcca3v0_codec: supplied by vcc_sys
[ 1.101707] vcc_1v5: supplied by vcc_sys
[ 1.102120] vcca1v8_codec: supplied by vcc_sys
[ 1.102728] vcc_3v0: supplied by vcc_sys
[ 1.103009] vcc3v3_s3: supplied by vcc3v3_sys
[ 1.103317] vcc3v3_s0: supplied by vcc3v3_sys
[ 1.106285] rk808-rtc rk808-rtc: registered as rtc0
[ 1.106805] rk808-rtc rk808-rtc: setting system clock to 2024-01-08 12:08:46 UTC (1704715726)
[ 1.107330] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.108281] vdd_cpu_b: supplied by vcc_sys
[ 1.108527] vcc1v8_s3: supplied by vcc_1v8
[ 1.109022] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.109963] vdd_gpu: supplied by vcc_sys
[ 1.110869] gsensor_mpu6500 4-0068: sensor_register_device: mpu6500_acc, id = 29
[ 1.110892] i2c i2c-4: sensor_probe: mpu6500_acc,00000000b142c779
[ 1.110933] gsensor_mpu6500 4-0068: sensor_chip_init:mpu6500_acc:devid=0x0,ops=0x000000008c54ba35
[ 1.111257] gsensor_mpu6500 4-0068: set MPU6500_PWR_MGMT_1 error,res: -6!
[ 1.111273] gsensor_mpu6500 4-0068: sensor_initial:fail to init sensor
[ 1.111286] gsensor_mpu6500 4-0068: sensor_chip_init:fail to init sensor
[ 1.111299] i2c i2c-4: sensor_probe failed -2
[ 1.111299]
[ 1.111341] i2c i2c-4: 1 i2c clients have been registered at 0x68
[ 1.111864] vm149c 1-000c: probing...
[ 1.111876] vm149c 1-000c: driver version: 00.01.00
[ 1.111886] vm149c 1-000c: could not get module rockchip,vcm-max-current from dts!
[ 1.111905] vm149c 1-000c: could not get module rockchip,vcm-start-current from dts!
[ 1.111918] vm149c 1-000c: could not get module rockchip,vcm-rated-current from dts!
[ 1.111931] vm149c 1-000c: could not get module rockchip,vcm-step-mode from dts!
[ 1.111964] vm149c 1-000c: probing successful
[ 1.112020] vm149c 1-000c-1: probing...
[ 1.112036] vm149c 1-000c-1: driver version: 00.01.00
[ 1.112049] vm149c 1-000c-1: could not get module rockchip,vcm-max-current from dts!
[ 1.112062] vm149c 1-000c-1: could not get module rockchip,vcm-start-current from dts!
[ 1.112075] vm149c 1-000c-1: could not get module rockchip,vcm-rated-current from dts!
[ 1.112088] vm149c 1-000c-1: could not get module rockchip,vcm-step-mode from dts!
[ 1.112113] vm149c 1-000c-1: probing successful
[ 1.112202] sgm3784 1-0030: driver version: 00.01.00
[ 1.112260] sgm3784 1-0030: get torch-gpio failed, using assist light mode
[ 1.112298] sgm3784 1-0030: led0 max torch:299200UA flash:1122000UA timeout:1600000US
[ 1.112316] sgm3784 1-0030: led1 max torch:299200UA flash:1122000UA timeout:1600000US
[ 1.112486] sgm3784 1-0030: sgm3784_i2c_read: reg:0x0 failed
[ 1.112503] sgm3784 1-0030: Read chip id error
[ 1.113687] iommu: Adding device ff910000.rkisp1 to group 5
[ 1.113716] rkisp1 ff910000.rkisp1: Linked as a consumer to ff914000.iommu
[ 1.113928] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[ 1.113963] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[ 1.114194] rkisp1 ff910000.rkisp1: Entity type for entity rkisp1-isp-subdev was not initialized!
[ 1.114868] iommu: Adding device ff920000.rkisp1 to group 6
[ 1.114897] rkisp1 ff920000.rkisp1: Linked as a consumer to ff924000.iommu
[ 1.115083] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[ 1.115115] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[ 1.115302] rkisp1 ff920000.rkisp1: Entity type for entity rkisp1-isp-subdev was not initialized!
[ 1.116699] usbcore: registered new interface driver uvcvideo
[ 1.116716] USB Video Class driver (1.1.1)
[ 1.117023] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.22
[ 1.117060] rockchip-iodomain ff320000.syscon:io-domains: pmu1830(3000000 uV) supplied by vcc_3v0
[ 1.117308] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.22
[ 1.117342] rockchip-iodomain ff770000.syscon:io-domains: bt656(3000000 uV) supplied by vcc_3v0
[ 1.117414] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
[ 1.117444] rockchip-iodomain ff770000.syscon:io-domains: audio(1800000 uV) supplied by vcca1v8_codec
[ 1.117508] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.18
[ 1.117537] rockchip-iodomain ff770000.syscon:io-domains: sdmmc(3000000 uV) supplied by vcc_sdio
[ 1.117625] rockchip-iodomain ff770000.syscon:io-domains: gpio1830(3000000 uV) supplied by vcc_3v0
[ 1.118471] __power_supply_register: Expected proper parent device for 'test_ac'
[ 1.118607] __power_supply_register: Expected proper parent device for 'test_battery'
[ 1.118807] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 1.118882] __power_supply_register: Expected proper parent device for 'test_usb'
[ 1.120119] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 1.121179] device-mapper: uevent: version 1.0.3
[ 1.121365] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
[ 1.121514] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[ 1.121542] Bluetooth: HCI UART driver ver 2.3
[ 1.121565] Bluetooth: HCI UART protocol H4 registered
[ 1.121844] cpu cpu0: bin=1
[ 1.121912] cpu cpu0: leakage=34
[ 1.122004] cpu cpu0: Linked as a consumer to regulator.12
[ 1.133231] cpu cpu0: temp=65000, pvtm=150613 (149029 + 1584)
[ 1.133665] cpu cpu0: Dropping the link to regulator.12
[ 1.133716] cpu cpu0: pvtm-volt-sel=2
[ 1.133747] cpu cpu0: bin-scale=34
[ 1.133857] cpu cpu4: bin=1
[ 1.133895] cpu cpu4: leakage=54
[ 1.134114] cpu cpu4: Linked as a consumer to regulator.25
[ 1.137222] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.147401] cpu cpu4: temp=64375, pvtm=158885 (158080 + 805)
[ 1.148660] cpu cpu4: Dropping the link to regulator.25
[ 1.148708] cpu cpu4: pvtm-volt-sel=2
[ 1.148738] cpu cpu4: bin-scale=17
[ 1.149078] cpu cpu0: Linked as a consumer to regulator.12
[ 1.149128] cpu cpu0: Dropping the link to regulator.12
[ 1.149260] cpu cpu0: Linked as a consumer to regulator.12
[ 1.149867] cpu cpu0: avs=0
[ 1.150107] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.150808] cpu cpu0: failed to find power_model node
[ 1.151092] cpu cpu4: Linked as a consumer to regulator.25
[ 1.151830] cpu cpu4: avs=0
[ 1.151885] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[ 1.152137] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.154434] cpu cpu4: failed to find power_model node
[ 1.155850] sdhci: Secure Digital Host Controller Interface driver
[ 1.155879] sdhci: Copyright(c) Pierre Ossman
[ 1.155925] Synopsys Designware Multimedia Card Interface Driver
[ 1.156575] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.156790] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.156828] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.156897] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 1.157061] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.157091] mmc_host mmc0: card is non-removable.
[ 1.170301] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.183756] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.184045] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.184101] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.184164] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.184325] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.3
[ 1.184432] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.18
[ 1.184567] mmc_host mmc1: card is polling.
[ 1.197678] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.210905] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.220462] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.222421] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.224314] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.227955] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.232717] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 1.235117] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 1.238907] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.240451] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.242529] usbcore: registered new interface driver usbhid
[ 1.242556] usbhid: USB HID core driver
[ 1.242629] ion_device_add_heap: ion_system_contig_heap id=0 type=1
[ 1.242818] ion_device_add_heap: ion_system_heap id=1 type=0
[ 1.242834] ion_device_add_heap: reserved id=2 type=4
[ 1.243046] ashmem: initialized
[ 1.245801] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
[ 1.246748] optee: probing for conduit method from DT.
[ 1.246798] optee: revision 1.1
[ 1.247539] optee: initialized driver
[ 1.247574] rknandbase v1.2 2021-01-07
[ 1.248390] usbcore: registered new interface driver snd-usb-audio
[ 1.249054] enter into es7210_modinit
[ 1.250334] rt5651 1-001a: Device with ID register 0xffffffc0 is not rt5651
[ 1.253930] netem: version 1.3
[ 1.253968] u32 classifier
[ 1.253973] Actions configured
[ 1.254488] xt_time: kernel timezone is -0000
[ 1.254577] gre: GRE over IPv4 demultiplexor driver
[ 1.254592] IPv4 over IPsec tunneling driver
[ 1.255173] Initializing XFRM netlink socket
[ 1.255196] IPsec XFRM device driver
[ 1.255482] NET: Registered protocol family 10
[ 1.256496] Segment Routing with IPv6
[ 1.256569] mip6: Mobile IPv6
[ 1.257079] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.257691] NET: Registered protocol family 17
[ 1.257718] NET: Registered protocol family 15
[ 1.257772] Bridge firewalling registered
[ 1.258141] Bluetooth: RFCOMM TTY layer initialized
[ 1.258158] Bluetooth: RFCOMM socket layer initialized
[ 1.258187] Bluetooth: RFCOMM ver 1.11
[ 1.258202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.258211] Bluetooth: BNEP filters: protocol multicast
[ 1.258222] Bluetooth: BNEP socket layer initialized
[ 1.258231] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.258241] Bluetooth: HIDP socket layer initialized
[ 1.258263] l2tp_core: L2TP core driver, V2.0
[ 1.258276] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.258285] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.258293] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.258564] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.258603] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[ 1.258613] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.258622] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.258654] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 3, flags = 0.
[ 1.258667] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 1.258676] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.258685] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[ 1.258694] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.259102] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 1.259126] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 1.259142] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 1.259158] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 1.259211] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.259290] [BT_RFKILL]: ** disable irq
[ 1.259393] [BT_RFKILL]: bt_default device registered.
[ 1.259709] gyro_mpu6500 4-0068-1: sensor_register_device: mpu6500_gyro, id = 56
[ 1.259722] i2c i2c-4: sensor_probe: mpu6500_gyro,000000006341dee5
[ 1.259751] gyro_mpu6500 4-0068-1: sensor_chip_init:mpu6500_gyro:devid=0x0,ops=0x00000000e7f74868
[ 1.260203] gyro_mpu6500 4-0068-1: sensor_active:fail to active sensor
[ 1.260216] gyro_mpu6500 4-0068-1: sensor_init:line=84,error
[ 1.260225] gyro_mpu6500 4-0068-1: sensor_initial:fail to init sensor
[ 1.260235] gyro_mpu6500 4-0068-1: sensor_chip_init:fail to init sensor
[ 1.260245] i2c i2c-4: sensor_probe failed -2
[ 1.260245]
[ 1.260562] usb 5-1: new low-speed USB device number 2 using xhci-hcd
[ 1.260575] ov13850 1-0010: driver version: 00.01.05
[ 1.260754] ov13850 1-0010: Linked as a consumer to regulator.9
[ 1.260792] ov13850 1-0010: 1-0010 supply dovdd not found, using dummy regulator
[ 1.260840] ov13850 1-0010: Linked as a consumer to regulator.0
[ 1.260860] ov13850 1-0010: 1-0010 supply dvdd not found, using dummy regulator
[ 1.260952] ov13850 1-0010: could not get sleep pinstate
[ 1.266637] ov13850 1-0010: Detected OV00d850 sensor, REVISION 0xb2
[ 1.266697] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: match m00_b_ov13850 1-0010:bus type 4
[ 1.266829] ov13850 1-0010-1: driver version: 00.01.05
[ 1.266858] ov13850 1-0010-1: Failed to get power-gpios, maybe no use
[ 1.266877] ov13850 1-0010-1: Failed to get reset-gpios, maybe no use
[ 1.266965] ov13850 1-0010-1: Linked as a consumer to regulator.9
[ 1.267002] ov13850 1-0010-1: 1-0010-1 supply dovdd not found, using dummy regulator
[ 1.267055] ov13850 1-0010-1: Linked as a consumer to regulator.0
[ 1.267075] ov13850 1-0010-1: 1-0010-1 supply dvdd not found, using dummy regulator
[ 1.267146] ov13850 1-0010-1: could not get sleep pinstate
[ 1.267207] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by 1-0010; cannot claim for 1-0010-1
[ 1.267217] rockchip-pinctrl pinctrl: pin-75 (1-0010-1) status -22
[ 1.267229] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout on device rockchip-pinctrl
[ 1.267240] ov13850 1-0010-1: Error applying setting, reverse things back
[ 1.267250] ov13850 1-0010-1: could not set pins
[ 1.269585] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 1.270255] mmcblk2: mmc2:0001 TX2932 29.1 GiB
[ 1.270848] mmcblk2boot0: mmc2:0001 TX2932 partition 1 4.00 MiB
[ 1.271386] mmcblk2boot1: mmc2:0001 TX2932 partition 2 4.00 MiB
[ 1.271595] mmcblk2rpmb: mmc2:0001 TX2932 partition 3 4.00 MiB, chardev (237:0)
[ 1.272101] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 1.272741] ov13850 1-0010-1: Detected OV00d850 sensor, REVISION 0xb2
[ 1.272812] rockchip-mipi-dphy-rx ff968000.mipi-dphy-tx1rx1: match m01_f_ov13850 1-0010-1:bus type 4
[ 1.273184] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by 1-0010; cannot claim for 1-003c
[ 1.273196] rockchip-pinctrl pinctrl: pin-75 (1-003c) status -22
[ 1.273208] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout on device rockchip-pinctrl
[ 1.273219] gc2145 1-003c: Error applying setting, reverse things back
[ 1.273250] gc2145: probe of 1-003c failed with error -22
[ 1.273781] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[ 1.274692] registered taskstats version 1
[ 1.274704] Loading compiled-in X.509 certificates
[ 1.274827] Key type ._fscrypt registered
[ 1.274837] Key type .fscrypt registered
[ 1.274846] Key type fscrypt-provisioning registered
[ 1.275127] pstore: Using compression: deflate
[ 1.276042] rga2: Driver loaded successfully ver:3.2.18218
[ 1.276291] rga2: Module initialized.
[ 1.284496] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[ 1.284515] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.284523] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 1.285060] hub 2-1:1.0: USB hub found
[ 1.285242] hub 2-1:1.0: 7 ports detected
[ 1.293274] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 1.300111] rockchip-drm display-subsystem: defer getting devfreq
[ 1.300281] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.300398] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[ 1.300444] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.300607] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[ 1.300685] rockchip-dp ff970000.edp: no DP phy configured
[ 1.301324] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops)
[ 1.301477] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.302311] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.303418] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[ 1.303437] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.303446] [drm] No driver support for vblank timestamp query.
[ 1.310670] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 1.404960] usb 5-1: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[ 1.404988] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.404996] usb 5-1: Product: Dell MS116 USB Optical Mouse
[ 1.405003] usb 5-1: Manufacturer: PixArt
[ 1.411820] vendor storage:20190527 ret = 0
[ 1.423454] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb5/5-1/5-1:1.0/0003:413C:301A.0001/input/input1
[ 1.424047] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-xhci-hcd.1.auto-1/input0
[ 1.491353] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 139
[ 1.509740] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1.839243] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.840154] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[ 1.841080] midgard ff9a0000.gpu: Linked as a consumer to regulator.26
[ 1.841141] midgard ff9a0000.gpu: leakage=39
[ 1.853373] midgard ff9a0000.gpu: temp=63750, pvtm=126493 (126229 + 264)
[ 1.854414] midgard ff9a0000.gpu: pvtm-volt-sel=2
[ 1.854807] midgard ff9a0000.gpu: avs=0
[ 1.855440] midgard ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 1.855548] midgard ff9a0000.gpu: Protected mode not available
[ 1.855987] midgard ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 1.856047] midgard ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 1.856161] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 417; [Func] : midgard_kbase_devfreq_init(); success initing power_model_simple.
[ 1.856866] midgard ff9a0000.gpu: Probed as mali0
[ 1.857632] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 1.857728] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.23
[ 1.857741] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.857753] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.857763] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 1.857776] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.857807] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.857816] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.862830] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.863236] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 1.863251] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 1.863262] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 1.863272] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 1.863281] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 1.863290] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 1.863299] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 1.863330] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 1.863340] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 1.863350] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.945658] libphy: stmmac: probed
[ 1.945714] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.945732] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 1.945749] mdio_bus stmmac-0:02: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:02, irq=POLL)
[ 1.945765] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 1.945782] mdio_bus stmmac-0:04: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:04, irq=POLL)
[ 1.945799] mdio_bus stmmac-0:05: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:05, irq=POLL)
[ 1.945815] mdio_bus stmmac-0:06: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:06, irq=POLL)
[ 1.945839] mdio_bus stmmac-0:07: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:07, irq=POLL)
[ 1.945862] mdio_bus stmmac-0:08: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:08, irq=POLL)
[ 1.945885] mdio_bus stmmac-0:09: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:09, irq=POLL)
[ 1.945908] mdio_bus stmmac-0:0a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0a, irq=POLL)
[ 1.945931] mdio_bus stmmac-0:0b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0b, irq=POLL)
[ 1.945954] mdio_bus stmmac-0:0c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0c, irq=POLL)
[ 1.945976] mdio_bus stmmac-0:0d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0d, irq=POLL)
[ 1.945999] mdio_bus stmmac-0:0e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0e, irq=POLL)
[ 1.946021] mdio_bus stmmac-0:0f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0f, irq=POLL)
[ 1.946044] mdio_bus stmmac-0:10: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:10, irq=POLL)
[ 1.946062] mdio_bus stmmac-0:11: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:11, irq=POLL)
[ 1.946084] mdio_bus stmmac-0:12: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:12, irq=POLL)
[ 1.946107] mdio_bus stmmac-0:13: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:13, irq=POLL)
[ 1.946129] mdio_bus stmmac-0:14: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:14, irq=POLL)
[ 1.946151] mdio_bus stmmac-0:15: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:15, irq=POLL)
[ 1.946174] mdio_bus stmmac-0:16: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:16, irq=POLL)
[ 1.946196] mdio_bus stmmac-0:17: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:17, irq=POLL)
[ 1.946219] mdio_bus stmmac-0:18: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:18, irq=POLL)
[ 1.946242] mdio_bus stmmac-0:19: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:19, irq=POLL)
[ 1.946265] mdio_bus stmmac-0:1a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1a, irq=POLL)
[ 1.946287] mdio_bus stmmac-0:1b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1b, irq=POLL)
[ 1.946305] mdio_bus stmmac-0:1c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1c, irq=POLL)
[ 1.946327] mdio_bus stmmac-0:1d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1d, irq=POLL)
[ 1.946350] mdio_bus stmmac-0:1e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1e, irq=POLL)
[ 1.946372] mdio_bus stmmac-0:1f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1f, irq=POLL)
[ 1.947988] input: adc-keys as /devices/platform/adc-keys/input/input2
[ 1.949143] rockchip-dmc dmc: Linked as a consumer to regulator.11
[ 1.949284] rockchip-dmc dmc: Failed to get ddr_leakage
[ 1.949850] rockchip-dmc dmc: avs=0
[ 1.950114] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.950160] rockchip-dmc dmc: could not find power_model node
[ 1.952231] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.957112] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[ 1.961731] It doesn't contain Rogue gpu
[ 1.961982] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.963186] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.964189] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '22:07:40', on 'Jan 7 2024'.
[ 1.964378] Mali:
[ 1.964379] Mali device driver loaded
[ 1.964406] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[ 1.964795] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.964812] cfg80211: failed to load regulatory.db
[ 1.965231] rkisp1: Async subdev notifier completed
[ 1.965248] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[ 1.965978] rkisp1: Async subdev notifier completed
[ 1.966074] ALSA device list:
[ 1.966085] #0: hdmi-sound
[ 1.966090] #1: ROCKCHIP,SPDIF
[ 1.968384] Freeing unused kernel memory: 4160K
[ 1.968471] Run /init as init process
[ 1.977868] init: init first stage started!
[ 1.977996] init: Unable to open /lib/modules, skipping module loading.
[ 1.978259] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 1.978875] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.008623] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
[ 2.008693] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.010313] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.010400] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk2p11 (executable not in system image)
[ 2.025212] EXT4-fs (mmcblk2p11): recovery complete
[ 2.025680] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: discard
[ 2.025759] init: [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=0: Success
[ 2.025915] init: Failed to copy /avb into /metadata/gsi/dsu/avb/: No such file or directory
[ 2.035403] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.043976] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.048523] EXT4-fs (dm-4): mounted filesystem without journal. Opts: barrier=1
[ 2.053746] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1
[ 2.059235] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.071714] init: 18 output lines suppressed due to ratelimiting
[ 2.171915] init: Loading SELinux policy
[ 2.195545] SELinux: policy capability network_peer_controls=1
[ 2.195580] SELinux: policy capability open_perms=1
[ 2.195587] SELinux: policy capability extended_socket_class=1
[ 2.195593] SELinux: policy capability always_check_network=0
[ 2.195600] SELinux: policy capability cgroup_seclabel=0
[ 2.195606] SELinux: policy capability nnp_nosuid_transition=1
[ 2.314496] audit: type=1403 audit(1704715727.706:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 2.314626] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
[ 2.314635] selinux:
[ 2.322401] selinux: SELinux: Loaded file_contexts
[ 2.322426] selinux:
[ 2.344468] init: init second stage started!
[ 2.398898] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.399708] init: Init cannot set 'ro.boot.verifiedbootstate' to 'orange': Read-only property was already set
[ 2.405361] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 2.406578] init: Setting product property ro.product.brand to 'rockchip' (from ro.product.product.brand)
[ 2.406615] init: Setting product property ro.product.device to 'rk3399_Android11' (from ro.product.product.device)
[ 2.406650] init: Setting product property ro.product.manufacturer to 'rockchip' (from ro.product.product.manufacturer)
[ 2.406682] init: Setting product property ro.product.model to 'rk3399-Android11' (from ro.product.product.model)
[ 2.406713] init: Setting product property ro.product.name to 'rk3399_Android11' (from ro.product.product.name)
[ 2.406756] init: Setting property 'ro.build.fingerprint' to 'rockchip/rk3399_Android11/rk3399_Android11:11/RQ2A.210505.003/eng.rootro.20240108.181630:userdebug/release-keys'
[ 2.449158] audit: type=1107 audit(1704715727.840:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { read } for property=persist.sys.adb_enable pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1'
[ 2.450893] audit: type=1107 audit(1704715727.843:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { read } for property=init.svc.adbd pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1'
[ 2.563108] ueventd: ueventd started!
[ 2.565619] selinux: SELinux: Loaded file_contexts
[ 2.565693] selinux:
[ 2.565916] ueventd: Parsing file /system/etc/ueventd.rc...
[ 2.566642] ueventd: Parsing file /vendor/ueventd.rc...
[ 2.567863] ueventd: Parsing file /odm/ueventd.rc...
[ 2.567927] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 2.567954] ueventd: Parsing file /ueventd.rk30board.rc...
[ 2.567982] ueventd: Unable to read config file '/ueventd.rk30board.rc': open() failed: No such file or directory
[ 2.593745] apexd: This device does not support updatable APEX. Exiting
[ 2.776652] midgard_kbase: disagrees about version of symbol module_layout
[ 2.958386] ueventd: Coldboot took 0.389 seconds
[ 3.070124] Registered swp emulation handler
[ 3.120381] logd.auditd: start
[ 3.120455] logd.klogd: 3116611046
console:/ $ [ 3.126786] EXT4-fs (mmcblk2p10): Ignoring removed nomblk_io_submit option
[ 3.130345] EXT4-fs (mmcblk2p10): recovery complete
[ 3.130366] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 3.180337] e2fsck: e2fsck 1.45.4 (23-Sep-2019)
[ 3.183174] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 3.187560] e2fsck: Pass 2: Checking directory structure
[ 3.188763] e2fsck: Pass 3: Checking directory connectivity
[ 3.188961] e2fsck: Pass 4: Checking reference counts
[ 3.196438] e2fsck: Pass 5: Checking group summary information
[ 3.210918] e2fsck: /dev/block/by-name/cache: 17/98304 files (0.0% non-contiguous), 7202/98304 blocks
[ 3.215782] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 3.325860] wait_for_keymaster: Waiting for Keymaster device
[ 3.358085] HidlServiceManagement: getService: Trying again for [email protected]::IKeymasterDevice/default...
INF USER-TA:read_data_from_uboot_ta:661: (read_data_from_uboot_ta) filename(security_partition) !
ERR [0x0] TEE-CORE:ree_fs_open:1492: tee file not exists
ERR USER-TA:read_data_from_uboot_ta:689: TEE_InvokeTACommand returned 0xffff0000
INF USER-TA:TA_OpenSessionEntryPoint:341: Hello Rockchip Keymaster! rpmb :1
[ 3.376038] wait_for_keymaster: List of Keymaster HALs found:
[ 3.376279] wait_for_keymaster: Keymaster HAL #1: OpteeKeymasterDevice from Rockchip SecurityLevel: TRUSTED_ENVIRONMENT HAL: [email protected]::IKeymasterDevice/default
[ 3.376566] wait_for_keymaster: Using OpteeKeymasterDevice from Rockchip for encryption. Security level: TRUSTED_ENVIRONMENT, HAL: [email protected]::IKeymasterDevice/default
[ 3.376581] wait_for_keymaster: Keymaster device ready
[ 3.426107] type=1400 audit(1704715728.816:5): avc: denied { create } for comm="kdevtmpfs" name="dm-5" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[ 3.426297] type=1400 audit(1704715728.816:6): avc: denied { setattr } for comm="kdevtmpfs" name="dm-5" dev="devtmpfs" ino=11442 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[ 3.448552] fsck.f2fs: Info: Fix the reported corruption.
[ 3.448887] fsck.f2fs: Info: No support kernel version!
[ 3.448907] fsck.f2fs: Info: Segments per section = 1
[ 3.448922] fsck.f2fs: Info: Sections per zone = 1
[ 3.448936] fsck.f2fs: Info: sector size = 4096
[ 3.448951] fsck.f2fs: Info: total sectors = 6601211 (25785 MB)
[ 3.449825] fsck.f2fs: Info: MKFS version
[ 3.449841] fsck.f2fs: "4.19.193 #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024"
[ 3.449852] fsck.f2fs: Info: FSCK version
[ 3.449867] fsck.f2fs: from "4.19.193 #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024"
[ 3.556569] F2FS-fs (dm-5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 3.647141] F2FS-fs (dm-5): Mounted with checkpoint version = 7eecb5ed
[ 3.749363] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
[ 3.766327] fscrypt: AES-256-XTS using implementation "xts-aes-ce"
[ 3.787885] apexd: This device does not support updatable APEX. Exiting
[ 3.787928] apexd: Marking APEXd as activated
[ 3.929767] type=1400 audit(1704715729.320:7): avc: denied { read } for comm="android.hardwar" name="resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[ 3.930005] type=1400 audit(1704715729.320:8): avc: denied { open } for comm="android.hardwar" path="/system/usr/share/resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[ 3.930161] type=1400 audit(1704715729.320:9): avc: denied { getattr } for comm="android.hardwar" path="/system/usr/share/resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[ 3.969982] apexd: This device does not support updatable APEX. Exiting
[ 3.970031] apexd: Marking APEXd as ready
[ 4.024480] logd.daemon: reinit
[ 4.067029] init: Verified that /data/nfc has the encryption policy 7a5fc0e58cc2ce73cd89ab7345f39323 v2 modes 1/4 flags 0xa
[ 4.067205] type=1400 audit(1704715729.456:10): avc: denied { setattr } for comm="init" name="nfc" dev="dm-5" ino=100 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 4.067516] init: Inferred action different from explicit one, expected 0 but got 2
[ 4.067536] type=1400 audit(1704715729.456:11): avc: denied { read } for comm="init" name="nfc" dev="dm-5" ino=100 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 4.067915] init: Verified that /data/nfc/param has the encryption policy 7a5fc0e58cc2ce73cd89ab7345f39323 v2 modes 1/4 flags 0xa
INF USER-TA:TA_OpenSessionEntryPoint:96: Hello Rockchip Weaver! rpmb :1
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.
ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!
INF USER-TA:read_securedata:322: TEE_ITEM_NOT_FOUND return !
INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.
ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!
[ 4.417186] Unable to handle kernel access to user memory outside uaccess routines at virtual address 000000000000005c
[ 4.420256] healthd: BatteryCurrentNowPath not found
[ 4.420594] Mem abort info:
[ 4.420748] healthd: BatteryCycleCountPath not found
[ 4.421005] ESR = 0x96000005
[ 4.421716] Exception class = DABT (current EL), IL = 32 bits
[ 4.422246] SET = 0, FnV = 0
[ 4.422523] EA = 0, S1PTW = 0
[ 4.422800] Data abort info:
[ 4.423055] ISV = 0, ISS = 0x00000005
[ 4.423400] CM = 0, WnR = 0
[ 4.423708] user pgtable: 4k pages, 39-bit VAs, pgdp = 000000002230a5eb
[ 4.424339] [000000000000005c] pgd=0000000000000000, pud=0000000000000000
[ 4.424945] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 4.425442] Modules linked in:
[ 4.425724] Process android.hardwar (pid: 273, stack limit = 0x0000000065e61e80)
[ 4.426377] CPU: 1 PID: 273 Comm: android.hardwar Not tainted 4.19.193 #1
[ 4.426540] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 4.426971] Hardware name: Rockchip RK3399 Excavator Board edp avb (Android) (DT)
[ 4.426977] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 4.428620] pc : optee_handle_rpc+0x3cc/0x578
[ 4.429013] lr : optee_handle_rpc+0x78/0x578
[ 4.429391] sp : ffffff800eba3aa0
[ 4.429690] x29: ffffff800eba3aa0 x28: ffffffc06ecf3a00
[ 4.430162] x27: 0000000000000000 x26: 0000000000000000
[ 4.430633] x25: ffffffc075336f00 x24: ffffffc07b2c8800
[ 4.431105] x23: 0000000000000001 x22: ffffff800ac000e0
[ 4.431576] x21: ffffffc075336880 x20: ffffff800eba3b88
[ 4.432047] x19: ffffff8009ccd000 x18: ffffff80096c5530
[ 4.432518] x17: 0000000000000000 x16: 0000000000000000
[ 4.432989] x15: ffffff8009ccdba8 x14: 0000000000000001
[ 4.433473] x13: 0000000000000001 x12: 000000000000029a
[ 4.433954] x11: 071c71c71c71c71c x10: 0000000000000a90
[ 4.434427] x9 : ffffff800eba3830 x8 : ffffff800eba3ba8
[ 4.434899] x7 : 0000000000000000 x6 : 0000000000000000
[ 4.435370] x5 : 0000000000000000 x4 : 0000000000000000
[ 4.435840] x3 : 0000000000000060 x2 : ffffffc075336f00
[ 4.436311] x1 : 0000000000000000 x0 : 0000000000000000
[ 4.436783]
[ 4.436783] PC: 0xffffff8008bd59fc:
[ 4.437219] 59fc 97d9ac61 17ffff66 d503201f f94012d7 f10006ff 54fff321 a94286c0 b40002c0
[ 4.437955] 5a1c f100041f 54ffeba1 aa0103e0 97fff714 b90016df 17ffff5a b94002c1 aa1703e3
[ 4.438685] 5a3c b9401ec2 aa1503e0 940000f1 b90016c0 b9401ec1 aa1703e2 aa1803e0 97fffa48
[ 4.439409] 5a5c 34fffce0 17ffffe4 129ffe60 b90016c0 17ffff4b d2800060 a905ffa0 aa0103e0
[ 4.440132] 5a7c b9805c21 a906ffa1 97fff709 910163a3 aa1703e2 528000e1 aa1503e0 940000dc
[ 4.440855] 5a9c b90016df 17ffff3e b94032c1 91012318 aa1803e0 97fffe9e aa0003f5 b4ffe6e0
[ 4.441577] 5abc 91004000 940e9302 aa1803e0 940e94ee aa1503e0 97e3f4f0 72001c1f 54000080
[ 4.442301] 5adc a94002a1 f9000420 f9000001 d2802001 d2804000 f2fbd5a1 f2fbd5a0 a90002a1
[ 4.443025]
[ 4.443025] LR: 0xffffff8008bd56a8:
[ 4.443460] 56a8 a8c27bfd d65f03c0 a9b87bfd 910003fd a9025bf5 aa0003f5 a90153f3 900087d3
[ 4.444185] 56c8 a90363f7 912b2260 f90023f9 aa0103f4 aa0203f7 f9400001 f9003fa1 d2800001
[ 4.444910] 56e8 f94002a0 97ffec41 79400281 7100083f 540009c0 540006a9 7100103f 540004a0
[ 4.445634] 5708 7100143f 540008a1 29408a99 aa0003f8 d2800001 aa198059 aa1903e0 97fff8e7
[ 4.446358] 5728 aa0003f6 b140041f 54001208 b9400000 7100141f 540012a0 54000888 71000c1f
[ 4.447082] 5748 540009c0 7100101f 54001341 b9401ec0 7100041f 540008c1 394082c0 f100041f
[ 4.447807] 5768 54000861 f94016c0 b40019a0 f100041f 540007e1 b94032c1 91012300 97ffff69
[ 4.448542] 5788 b4000060 91004000 97d4d8ba b90016df 52800060 912b2273 72a64000 b9000280
[ 4.449272]
[ 4.449272] SP: 0xffffff800eba3a20:
[ 4.449708] 3a20 7b2c8800 ffffffc0 75336f00 ffffffc0 00000000 00000000 00000000 00000000
[ 4.450431] 3a40 6ecf3a00 ffffffc0 0eba3aa0 ffffff80 08bd5728 ffffff80 0eba3aa0 ffffff80
[ 4.451154] 3a60 08bd5a7c ffffff80 60400005 00000000 7b2c8818 ffffffc0 75336880 ffffffc0
[ 4.451878] 3a80 ffffffff 0000007f 56000000 00000000 0eba3aa0 ffffff80 08bd5a7c ffffff80
[ 4.452601] 3aa0 0eba3b30 ffffff80 08bd4968 ffffff80 09ccd000 ffffff80 7b2c8800 ffffffc0
[ 4.453323] 3ac0 0eba3ba8 ffffff80 7b2c8818 ffffffc0 75336880 ffffffc0 ffff0005 00000000
[ 4.454046] 3ae0 56000000 00000000 08bd4534 ffffff80 0eba3b10 ffffff80 00000003 00000000
[ 4.454769] 3b00 00000000 00000000 00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e
[ 4.455493]
[ 4.455493] X2: 0xffffffc075336e80:
[ 4.455929] 6e80 00000000 00000000 0ec80000 ffffff80 00005000 00000000 00000002 00000000
[ 4.456652] 6ea0 75336b00 ffffffc0 00000004 00000000 00000000 00000000 080b7bb0 ffffff80
[ 4.457386] 6ec0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.458116] 6ee0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.458848] 6f00 7b2d5800 ffffffc0 75336880 ffffffc0 753e0b10 ffffffc0 75336888 ffffffc0
[ 4.459577] 6f20 09e080e0 00000000 0ac000e0 ffffff80 00000060 00000000 00000000 00000000
[ 4.460300] 6f40 00000000 00000000 00000000 00000000 00000000 00000000 00000021 00000002
[ 4.461022] 6f60 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.461747]
[ 4.461747] X8: 0xffffff800eba3b28:
[ 4.462183] 3b28 000000a0 00000000 0eba3c00 ffffff80 08bd4dfc ffffff80 00000000 00000000
[ 4.462906] 3b48 09ccd000 ffffff80 75336880 ffffffc0 753e0c00 ffffffc0 0eba3cb0 ffffff80
[ 4.463629] 3b68 753e0a80 ffffffc0 6da01020 ffffffc0 00000000 00000000 00000000 00000000
[ 4.464353] 3b88 ffff0005 ffffffc0 75336f00 00000000 00000000 00000000 00000000 00000000
[ 4.465076] 3ba8 ffff0005 00000000 ffffffc0 00000000 75336f00 00000000 00000000 00000000
[ 4.465799] 3bc8 7b2c8838 ffffffc0 7b2c8838 ffffffc0 00000000 ffffffc0 00000000 ffffff80
[ 4.466522] 3be8 0eba3be8 ffffff80 0eba3be8 ffffff80 5a82dd00 e76a065e 0eba3c60 ffffff80
[ 4.467245] 3c08 08bd1678 ffffff80 dd05d6f0 0000007f 75336880 ffffffc0 09ccd000 ffffff80
[ 4.467969]
[ 4.467969] X9: 0xffffff800eba37b0:
[ 4.468404] 37b0 0000005c 00000000 00000025 00000000 75336f00 ffffffc0 00000000 00000000
[ 4.469127] 37d0 00000000 00000000 6ecf3a00 ffffffc0 00000000 00000000 099c1000 ffffff80
[ 4.469849] 37f0 0eba3810 ffffff80 08086b3c ffffff80 7e101d00 ffffffc0 6ecf3a00 ffffffc0
[ 4.470572] 3810 0eba3850 ffffff80 08f791f8 ffffff80 00000000 00000000 7ef59240 ffffffc0
[ 4.471295] 3830 7e101d00 ffffffc0 099c1000 ffffff80 797cd500 ffffffc0 09ccd000 ffffff80
[ 4.472018] 3850 0eba38e0 ffffff80 08f79868 ffffff80 6ecf3a00 ffffffc0 75167f38 ffffffc0
[ 4.472741] 3870 09ccd000 ffffff80 5a82dd00 e76a065e 0eba3890 ffffff80 08080d5c ffffff80
[ 4.473465] 3890 0eba3a90 ffffff80 08082bc4 ffffff80 09ccd000 ffffff80 ffffffff 0000007f
[ 4.474191]
[ 4.474191] X15: 0xffffff8009ccdb28:
[ 4.474638] db28 00000000 00000000 0a2d2600 ffffffc0 0a2d2800 ffffffc0 0a2d2a00 ffffffc0
[ 4.475362] db48 0a2d2c00 ffffffc0 0a2d2e00 ffffffc0 0a2d3000 ffffffc0 0a2d3200 ffffffc0
[ 4.476087] db68 0a2e2000 ffffffc0 00000001 00000001 017ed73b 00000020 00000000 00000000
[ 4.476812] db88 00000000 00000000 0007a120 00000000 000000b4 00000000 00000000 00000000
[ 4.477537] dba8 77686f88 00000000 00000000 00000000 00004e20 00000000 00000000 00000000
[ 4.478261] dbc8 00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.478986] dbe8 00000000 00000000 0002bf20 00000015 00000001 00000001 00000001 00000000
[ 4.479709] dc08 00000002 00000000 00000001 00000001 00000000 00000000 00000000 00000005
[ 4.480433]
[ 4.480433] X18: 0xffffff80096c54b0:
[ 4.480880] 54b0 73657270 65727573 006f692f 00000000 73657270 65727573 6d656d2f 0079726f
[ 4.481605] 54d0 73657270 65727573 7570632f 00000000 73703301 69203a69 6e6f636e 74736973
[ 4.482330] 54f0 20746e65 6b736174 61747320 20216574 6b736174 3a64253d 63207325 253d7570
[ 4.483057] 5510 73702064 6c665f69 3d736761 63207825 7261656c 2078253d 3d746573 000a7825
[ 4.483781] 5530 73703301 74203a69 206b7361 65646e75 6f6c6672 63202177 253d7570 3d742064
[ 4.484507] 5550 74206425 736b7361 75255b3d 20752520 205d7525 61656c63 78253d72 74657320
[ 4.485233] 5570 0a78253d 00000000 3a697370 69727420 72656767 61656c20 00000a6b 00000000
[ 4.485959] 5590 656d6f73 00000000 61207325 30316776 756c253d 3230252e 6120756c 30366776
[ 4.486689]
[ 4.486689] X19: 0xffffff8009cccf80:
[ 4.487152] cf80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.487888] cfa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.488613] cfc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.489339] cfe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.490078] d000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.490810] d020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.491536] d040 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.492275] d060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.493010]
[ 4.493010] X20: 0xffffff800eba3b08:
[ 4.493468] 3b08 00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e 0eba3ba8 ffffff80
[ 4.494223] 3b28 000000a0 00000000 0eba3c00 ffffff80 08bd4dfc ffffff80 00000000 00000000
[ 4.494969] 3b48 09ccd000 ffffff80 75336880 ffffffc0 753e0c00 ffffffc0 0eba3cb0 ffffff80
[ 4.495701] 3b68 753e0a80 ffffffc0 6da01020 ffffffc0 00000000 00000000 00000000 00000000
[ 4.496428] 3b88 ffff0005 ffffffc0 75336f00 00000000 00000000 00000000 00000000 00000000
[ 4.497154] 3ba8 ffff0005 00000000 ffffffc0 00000000 75336f00 00000000 00000000 00000000
[ 4.497881] 3bc8 7b2c8838 ffffffc0 7b2c8838 ffffffc0 00000000 ffffffc0 00000000 ffffff80
[ 4.498608] 3be8 0eba3be8 ffffff80 0eba3be8 ffffff80 5a82dd00 e76a065e 0eba3c60 ffffff80
[ 4.499336]
[ 4.499336] X21: 0xffffffc075336800:
[ 4.499783] 6800 0ed08000 ffffff80 0ed0d000 ffffff80 00000004 00000000 6eddf899 ffffffc0
[ 4.500507] 6820 00000000 00000000 00000000 00000000 76815d30 ffffffc0 6eddf8b0 ffffffc0
[ 4.501232] 6840 75336900 ffffffc0 75336980 ffffffc0 000000e8 0000000a 75336a00 ffffffc0
[ 4.501956] 6860 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.502679] 6880 7b2d5800 ffffffc0 75336f10 ffffffc0 753e0a90 ffffffc0 75336a80 ffffffc0
[ 4.503405] 68a0 00000005 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.504133] 68c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.504859] 68e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.505586]
[ 4.505586] X22: 0xffffff800ac00060:
[ 4.506047] 0060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.506797] 0080 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.507543] 00a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.508275] 00c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.509001] 00e0 00000007 00000000 00000000 00000000 00000000 ffff0000 00000002 00000001
[ 4.509724] 0100 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.510449] 0120 0000000a 00000000 09e0c000 00000000 00000200 00000000 6ef95280 ffffffc0
[ 4.511174] 0140 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.511902]
[ 4.511902] X24: 0xffffffc07b2c8780:
[ 4.512350] 8780 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.513075] 87a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.513811] 87c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.514545] 87e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.515270] 8800 7b2d6000 ffffffc0 7b2d5800 ffffffc0 08bd40f0 ffffff80 00000000 00000000
[ 4.515998] 8820 00000000 00000000 7b2c8828 ffffffc0 7b2c8828 ffffffc0 0eba3bc8 ffffff80
[ 4.516726] 8840 0eba3bc8 ffffff80 00000000 00000000 00000000 00000000 7b2c8858 ffffffc0
[ 4.517455] 8860 7b2c8858 ffffffc0 7b2c8868 ffffffc0 7b2c8868 ffffffc0 00000000 00000000
[ 4.518185]
[ 4.518185] X25: 0xffffffc075336e80:
[ 4.518634] 6e80 00000000 00000000 0ec80000 ffffff80 00005000 00000000 00000002 00000000
[ 4.519363] 6ea0 75336b00 ffffffc0 00000004 00000000 00000000 00000000 080b7bb0 ffffff80
[ 4.520090] 6ec0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.520817] 6ee0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.521545] 6f00 7b2d5800 ffffffc0 75336880 ffffffc0 753e0b10 ffffffc0 75336888 ffffffc0
[ 4.522284] 6f20 09e080e0 00000000 0ac000e0 ffffff80 00000060 00000000 00000000 00000000
[ 4.523017] 6f40 00000000 00000000 00000000 00000000 00000000 00000000 00000021 00000002
[ 4.523743] 6f60 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.524474]
[ 4.524474] X28: 0xffffffc06ecf3980:
[ 4.524935] 3980 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.525668] 39a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.526393] 39c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.527117] 39e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.527855] 3a00 04000028 00000000 ffffffff ffffffff 6ec5b000 011a0000 00000001 00000000
[ 4.528602] 3a20 00000000 00000000 0eba0000 ffffff80 00000004 00404100 00000000 00000000
[ 4.529344] 3a40 00000000 00000000 00000001 00000001 0000006b 00000000 fffea531 00000000
[ 4.530096] 3a60 76a70e80 ffffffc0 00000001 00000001 00000001 00000078 00000078 00000078
[ 4.530833]
[ 4.530833] X29: 0xffffff800eba3a20:
[ 4.531282] 3a20 7b2c8800 ffffffc0 75336f00 ffffffc0 00000000 00000000 00000000 00000000
[ 4.532007] 3a40 6ecf3a00 ffffffc0 0eba3aa0 ffffff80 08bd5728 ffffff80 0eba3aa0 ffffff80
[ 4.532733] 3a60 08bd5a7c ffffff80 60400005 00000000 7b2c8818 ffffffc0 75336880 ffffffc0
[ 4.533471] 3a80 ffffffff 0000007f 56000000 00000000 0eba3aa0 ffffff80 08bd5a7c ffffff80
[ 4.534204] 3aa0 0eba3b30 ffffff80 08bd4968 ffffff80 09ccd000 ffffff80 7b2c8800 ffffffc0
[ 4.534930] 3ac0 0eba3ba8 ffffff80 7b2c8818 ffffffc0 75336880 ffffffc0 ffff0005 00000000
[ 4.535657] 3ae0 56000000 00000000 08bd4534 ffffff80 0eba3b10 ffffff80 00000003 00000000
[ 4.536381] 3b00 00000000 00000000 00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e
[ 4.537106]
[ 4.537248] Call trace:
[ 4.537479] optee_handle_rpc+0x3cc/0x578
[ 4.537838] optee_do_call_with_arg+0x120/0x140
[ 4.538240] optee_invoke_func+0x13c/0x1a8
[ 4.538610] tee_ioctl_invoke+0x230/0x4d0
[ 4.538968] tee_ioctl+0x9c4/0xef8
[ 4.539271] do_vfs_ioctl+0xbc/0xda8
[ 4.539594] ksys_ioctl+0x84/0x98
[ 4.539908] __arm64_sys_ioctl+0x18/0x28
[ 4.540260] el0_svc_common.constprop.0+0x64/0x178
[ 4.540686] el0_svc_handler+0x28/0x78
[ 4.541030] el0_svc+0x8/0xc
[ 4.541295] Code: 17ffff4b d2800060 a905ffa0 aa0103e0 (b9805c21)
[ 4.541839] ---[ end trace e5d69e93a6606583 ]---
[ 4.556514] Kernel panic - not syncing: Fatal exception
[ 4.556980] SMP: stopping secondary CPUs
[ 4.557371] CRU:
[ 4.557542] 00000000: 0000003b 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[ 4.558296] 00000020: 00000032 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[ 4.559050] 00000040: 0000006b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 4.559804] 00000060: 00000064 00001403 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 4.560558] 00000080: 00000064 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 4.561312] 000000a0: 0000004b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 4.562065] 000000c0: 00000129 00001608 8000031f 00000108 00000007 00007f00 00000000 00000000
[ 4.562819] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.563573] 00000100: 00000100 00000606 00000140 00006505 00000083 00008580 00008320 00000141
[ 4.564327] 00000120: 00000181 00008181 00000141 00000141 00004141 00008343 00003185 00000103
[ 4.565081] 00000140: 00000477 00000300 00004a87 0000033f 00009381 00008387 00001103 00005282
[ 4.565835] 00000160: 00008247 00000187 00001784 0000001f 00000380 00000300 00000380 00000000
[ 4.566589] 00000180: 00006380 00001200 00000200 00000200 00000200 00000200 00003f3f 00000081
[ 4.567343] 000001a0: 00000000 00000000 00004141 00000421 00008700 000002dc 00000004 00000381
[ 4.568097] 000001c0: 00000381 00000100 00000000 00000087 00000087 00000141 00000141 00008181
[ 4.568851] 000001e0: 00008323 00000007 00008f1f 00008f8f 00008f8f 00008783 00008787 00008787
[ 4.569605] 00000200: 000000c5 000000cf 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.570359] 00000220: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.571113] 00000240: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.571866] 00000260: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.572620] 00000280: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60
[ 4.573374] 000002a0: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 00000000 00000000 00000000 00000000
[ 4.574128] 000002c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.574882] 000002e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.575635] 00000300: 00000080 00000080 00000202 0000006f 00000c30 000001c0 0000001d 000001c0
[ 4.576390] 00000320: 0000fff8 0000f0ff 0000c0ff 0000c130 00000040 0000e233 00000000 00000000
[ 4.577143] 00000340: 00000505 00000505 00001000 00000000 00000e04 0000000f 0000cfeb 00003f00
[ 4.577897] 00000360: 0000ef60 00000020 00000ffe 000001f0 00000000 00000f86 00000d08 00000180
[ 4.578651] 00000380: 00000010 00000000 0000003a 00000000 00000000 00000000 00000000 00000000
[ 4.579405] 000003a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.580158] 000003c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.580912] 000003e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.581665] 00000400: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.582419] 00000420: 00000080 00004070 00000000 00000014 00000000 00000000 00000000 00000000
[ 4.583172] 00000440: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.583925] 00000460: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.584679] 00000480: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.585433] 000004a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.586187] 000004c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.586941] 000004e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.587695] 00000500: 00000000 00000000 00640064 00000000 00000003 00000003 00000000 00000000
[ 4.588448] 00000520: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.589202] 00000540: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.589956] 00000560: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.590707] 00000580: 00000002 00000000 00000004 000008ba 00000004
[ 4.591254] PMU CRU:
[ 4.591458] 00000000: 000000a9 00001203 80000000 00000108 00000007 00007f00 00000000 00000000
[ 4.592213] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.592969] 00000040: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.593724] 00000060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.594480] 00000080: 0000060d 00001986 00000303 00000003 000002dc 00000200 0bb8ea60 00010014
[ 4.595235] 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.595990] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.596746] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.597501] 00000100: 00000ffc 0000fb80 0000000f 00000000 00000024 00000000 00000000 00000000
[ 4.598254] 00000120: 00000000 00000000 00000000 00000000 00000003
[ 4.598802] PMU:
[ 4.598983] 00000000: 00000000 00000000 00000000 00000000 00000000 80cf8100 80cf8100 00000000
[ 4.599738] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.600494] 00000040: 00000000 00000000 00000000 00000000 00000000 82cf833f 00000000 00000000
[ 4.601249] 00000060: 20000679 20000679 20000679 00000010 00000000 00007e00 00000000 28800000
[ 4.602005] 00000080: 000003c0 00011940 00005dc0 000003c0 00005dc0 00000060 0000000f 00000018
[ 4.602761] 000000a0: 00000018 00000018 00000018 00000006 00000006 00005dc0 00005dc0 00005dc0
[ 4.603516] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 3fffffff 00000000
[ 4.604272] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.605021] Kernel Offset: disabled
[ 4.605334] CPU features: 0x00000000,2000600c
[ 4.605722] Memory Limit: none
[ 4.606012] rockchip-thermal ff260000.tsadc: channal 0: temperature(67 C)
[ 4.606606] rockchip-thermal ff260000.tsadc: channal 1: temperature(63 C)
[ 4.607198] THERMAL REGS:
[ 4.607435] 00000000: 00000200 00030133 00000031 00000002 00000000 00000000 00000000 00000000
[ 4.608190] 00000020: 00000248 00000244 00000000 00000000 0000024e 00000000 00000000 00000000
[ 4.608944] 00000040: 000002a5 000002a5 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.609699] 00000060: 00000004 00000004 00000753 00000753 00000000 00000000 00000000 00000000
[ 4.610449] 00000080: 00000000 00000000
[ 4.626010] Rebooting in 5 seconds..
DDR Version 1.25 20210517
【相关的资料：】
百度搜索：ifeq ($(strip $(BOARD_HAS_EC20_MODEM)),true)
RK3399 EC20 步骤
Android6.0 RK3399 PCIe 接口 4G模块 EC20 调试记录
rk3568 Android11系统调试ec20模块的gps功能
RK3568-ANDROID11-4G-EC20-(详细步骤)
RK356X android11 移远EC20 modem支持
[ 87.794373] init: Sending signal 9 to service 'ril-daemon' (pid 2176) proce
重复打印'[email protected]::IRadio/slot1'
+ if(strcmp(descriptor.c_str(),"[email protected]::IRadio") != 0)
[ 44.972959] init: Control message: Processed ctl.interface_start for 'andro
'[email protected]::IRadio/slot1' from pid: 154 (/system/bin/hwserv
init: Control message: Processed ctl.interface_start for 'android.hardware.r
type=1400 audit(1704645252.746:494): avc: denied { read write } for comm="ri
BING：[ 44.972959] init: Control message: Processed ctl.interface_start for '[email protected]::IRadio/slot1' from pid: 149 (/system/bin/hwservicemanager)
https://blog.csdn.net/longmin96/article/details/122716504
RK3568-ANDROID11-4G-EC20-(详细步骤)
注意：硬件可以先使用USB转接板把模块接到电脑上，使用AT指令把模块调好。
https://blog.csdn.net/longmin96/article/details/122687117
RK3568-ANDROID11-4G-EC20-驱动篇（移远模块）
旋风旋风
https://blog.csdn.net/longmin96/article/details/122687865
RK3568-ANDROID11-4G-EC20-系统篇（移远模块）
首先，要先获得技术支持
步骤一，先在USB模块上完成4G
步骤二，移植到PCIE座子上
https://blog.csdn.net/weixin_51178981/article/details/124804679
NXP(imx8qxp)上android11的EG25-G(4G)模块调试记录
修改selinux的权限
修改/system/core/init/selinux.cpp
diff --git a/init/selinux.cpp b/init/selinux.cpp
index 5a0255acd..ae6f1fce9 100644
--- a/init/selinux.cpp
+++ b/init/selinux.cpp
@@ -104,6 +104,7 @@ EnforcingStatus StatusFromCmdline() {
}
bool IsEnforcing() {
+ return false;
if (ALLOW_PERMISSIVE_SELINUX) {
return StatusFromCmdline() == SELINUX_ENFORCING;
}
https://blog.csdn.net/terry_xiwang/article/details/123137864
RK3568 Android12 移远4G模块EM05-CE 调试心得
4、适配Android部分的时候主要是利用了rk已有的4g modem框架，打开BOARD_HAS_RK_4G_MODEM属性，并将librk-ril.so 替换为Quectel的ril库，这样会少走一些弯路。
5、我用的ril库版本为Quectel_Android_RIL_Driver_V3.3.78，这个版本才能适配Android12。之前用过3.3.57和3.3.62版本的库，加载时都会报错：
【关闭多余的打印LOG】
https://bbs.elecfans.com/jishu_2263076_1_1.html
[问答] 如何调试RK3568-ANDROID11-4G-EC20？
【下载】
https://download.csdn.net/download/seasonfangjing/86247556?utm_source=bbsseo
RK356X android11 移远EC20 modem支持
https://blog.csdn.net/weixin_38420901/article/details/129875533
移远EC20 WINDOWS下安装驱动及开机自动拨号上网
https://download.csdn.net/download/weixin_38420901/87635376
移远EC20 Windows驱动
https://download.csdn.net/download/guoruibin123/19886298
移远EC20 R2.0 全网通4G模块软硬件设计技术资料包（包括模块封装+软硬件设计文档+软件驱动）.zip
https://download.csdn.net/download/xieyunfei1999/88332693
移远USB驱动V2.2.2 Quectel-LTE&5G-Windows-USB-Driver-V2.2.2 EC20最新驱动
https://blog.csdn.net/yjz_0314/article/details/134142847
Android11.0系统中适配EC20模块4G及GPS功能
https://download.csdn.net/download/yjz_0314/88490693?spm=1001.2101.3001.9500
Android11.0系统中适配EC20模块4G及GPS功能
https://download.csdn.net/download/seasonfangjing/88073682
RK3588S android13 ec20 modem移植
https://blog.csdn.net/xierong1/article/details/127091908
rk3399调试EC20 4G模块
还有 android 8.1 与5.1区别很大就是 系统权限
Selinux
./device/rockchip/common/sepolicy/rild.te
./system/sepolicy/vendor/rild.te
./system/sepolicy/public/rild.te
./system/sepolicy/prebuilts/api/26.0/public/rild.te
https://www.cnblogs.com/lialong1st/p/11266330.html
https://blog.csdn.net/weixin_30273931/article/details/101681600
RK3399 4G模块移远EC20移植调试
https://download.csdn.net/download/weixin_44498318/18300885
RK3399 安卓Q适配EC20 4G模块资料
https://blog.csdn.net/linux_qian/article/details/90715599/
rk3399添加EC25E/EC20...模组
搞来搞去搞了很久，差点放弃走人的时候，发现竟然是这点事。。。辛酸史如下：
android6.01-----kernel4.4.36-----编译环境ubuntu16.04
一、kernel driver
内核有4种驱动方式，usb serial、CDC ACM、Gobinet、QMI WWAN，本文选用的是usb serial和QMI WWAN两种驱动。
（4）打开dongle功能
/device/rockchip/common/BoardConfig.mk
BOARD_HAVE_DONGLE ?= true
（5）检查
logcat -b radio -v time //查看log
getprop init.svc.ril-daemon //检查ril守护进程Runing
cat init.rc | grep ril-daemon //检查ril-daemon服务是否生效
getenforce //检查SELinux是否开启，<setenforce 0>命令关闭
getprop gsm.version.ril-impl //检查ril版本，出现Quectel_Android_RIL_SR01A41V17,如未出现ril库没有添加上，或者检查phone进程
https://blog.csdn.net/weixin_43069863/article/details/126587254
rk3568 4g 模块调试-ec20（移远模块）
如果无法上网，也可以尝试修改上网状态的选择模式
--- a/frameworks/base/telephony/java/com/android/internal/telephony/RILConstants.java
+++ b/frameworks/base/telephony/java/com/android/internal/telephony/RILConstants.java
@@ -237,7 +237,7 @@ public interface RILConstants {
int PREFERRED_NETWORK_MODE = Optional.of(TelephonyProperties.default_network())
.filter(list -> !list.isEmpty())
.map(list -> list.get(0))
- .orElse(NETWORK_MODE_WCDMA_PREF);
+ .orElse(NETWORK_MODE_LTE_GSM_WCDMA);
int BAND_MODE_UNSPECIFIED = 0; //"unspecified" (selected by baseband automatically)
int BAND_MODE_EURO = 1; //"EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
https://blog.csdn.net/weixin_44498318/article/details/109289482
Android：记录一下RK3399 安卓Q适配EC20 4G模块（附log）
4.2 SELinux权限问题
添加权限：
SELinux权限问题解决方法 - CSDN
Selinux SeAndroid理解 - CSDN
Android : SELinux 简析&修改 - 博客园
默认关闭/开启权限：
ANDROID10 关闭SELINUX权限方法 - 灰信网
参考资料：
http://www.friendlyelec.com.cn/agent.asp
http://www.friendlyelec.com.cn/
https://download.friendlyelec.com/NanoPC-T4
https://wiki.friendlyelec.com/wiki/index.php/NanoPC-T4/zh#.E4.B8.8B.E8.BD.BDAndroid10.E6.BA.90.E4.BB.A3.E7.A0.81
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.37562e8dcotDm6&id=570312633249&_u=7ju3ku004a
友善NanoPC-T4瑞芯微RK3399开发板ROS双摄4K播放开源AI智能安卓10
WiKi维基教程（固件介绍，使用说明，操作步骤等）
http://wiki.friendlyelec.com/wiki/index.php/NanoPC-T4
系统固件下载
https://dl.friendlyelec.com/nanopct4
原理图(pdf格式)
http://wiki.friendlyelec.com/wiki/images/e/e0/NanoPC-T4-1902-Schematic.pdf
尺寸图(dxf格式)
http://wiki.friendlyelec.com/wiki/images/b/bc/NanoPC-T4_1802_Drawing%28dxf%29.zip
http://www.friendlyelec.com.cn/nanopi-m4.asp
NanoPi M4 | NanoPi M4V2
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_M4/zh
15.3 编译Android10源代码
15.3.1 下载Android10源代码
有以下两种途径获取 Android10 的源代码，都需要联网:
使用网盘里的git repo压缩包
网盘下载地址: 点击进入
https://download.friendlyelec.com/NanoPiM4
https://pan.baidu.com/share/init?surl=oBLn9H31hILJKEPQXgrUog
提取码：yn6r
智能推荐
奈飞经济学_经济学案例分析 netflix-程序员宅基地
文章浏览阅读1.2k次。所谓“奈飞经济学”，是一种让用户在网上订阅视频内容的科学。——《经济学人》是什么令奈飞（Netflix)从一家DVD租赁公司，一跃成为西方的五大互联网巨头之一？它如何影响并改变了电影、电视、流媒体行业？《经济学人》定义的“奈飞经济学”概念，为你解答了这些问题。今天的议题分为三个部分：为何会诞生“奈飞经济学”概念？是什么构成了“奈飞经济学”？它为影视、流媒体行业带来了什么样的影响？每家成功的大公司，..._经济学案例分析 netflix
C++版本OpenCv教程(四)4种读取Mat类元素的的方法_c++ mat 三通道-程序员宅基地
文章浏览阅读9.7k次，点赞8次，收藏40次。目录通过at方法读取Mat类矩阵中的元素通过指针ptr读取Mat类矩阵中的元素通过迭代器访问Mat类矩阵中的元素通过矩阵元素地址定位方式访问元素对于Mat类矩阵的读取与更改，我们已经在矩阵的循环赋值中见过如何用at方法对矩阵的每一位进行赋值，这只是OpenCV提供的多种读取矩阵元素方式中的一种，本小节将详细介绍如何读取Mat类矩阵中的元素，并对其数值进行修改。在学习如何读取Mat类矩阵元素之前，首先需要知道Mat类变量在计算机中是如何存储的。多通道的Mat类矩阵是一个类似于三维的数据，而计算机的存储空间是_c++ mat 三通道
安装Mysql时出现服务未启动（start service）解决办法_mysql start service-程序员宅基地
文章浏览阅读2.4k次，点赞2次，收藏8次。安装Mysql时出现服务未启动（start service）解决办法。_mysql start service
Android开发 webview闪退,Android5以后WebView闪退问题-程序员宅基地
文章浏览阅读2.3k次。Android4.4开发项目中的webview在Android各个版本运行的飞起，可是项目升级，最低版本适配5.0之后，webview各种闪退问题真让人头大！！！！！！！！！！！！！！！啊啊啊啊啊啊啊啊啊啊啊啊啊啊啊我太难了！仔细对比了两个项目的差异，有所发现：Android5.0的build.gradle，注意implementation 'androidx.appcompat:appcompa..._hwtriwebviewlib.apk闪退
html5定位没定到,关于html5+定位的有关经验-程序员宅基地
文章浏览阅读133次。搞了两天,终于把ios跟android端的定位搞明白了,直接看代码//定位的代码要写在plusReady()里面,而且不能用mui自带的mui.plusReady(){}if(window.plus){plusReady();}else{document.addEventListener("plusready",plusReady,false);}function plusReady(){/and..._mapobj.getuserlocation获取不到当前位置信息
Excel 函数 Indirect 使用详解_indirect函数的参数-程序员宅基地
文章浏览阅读2.4k次，点赞2次，收藏10次。或文本字符串构成的。_indirect函数的参数
随便推点
数据融合技术原理与方法_数据融合入门-程序员宅基地
文章浏览阅读3.2w次，点赞16次，收藏95次。转自：http://www.cppblog.com/COOOOOOOOL/archive/2010/03/16/109832.html数据融合（data fusion）最早被应用于军事领域。 现在数据融合的主要应用领域有：多源影像复合、机器人和智能仪器系统、战场和无人驾驶飞机、图像分析与理解、目标检测与跟踪、自动目标识别等等。在遥感中，数据融合属于一种属性融合，它是将同一地区的多源遥..._数据融合入门
在Windows服务器上启用TLS 1.2及TLS 1.2基本原理_windows 开启tlsv1.2-程序员宅基地
文章浏览阅读7.8w次，点赞2次，收藏8次。在Windows服务器上启用TLS 1.2及TLS 1.2基本原理2015-10-23 17:28在Windows服务器上启用TLS 1.2及TLS 1.2基本原理 最近由于Chrome40不再支持SSL 3.0了，GOOGLE认为SSL3.0已经不再安全了。所以也研究了一下SSL TLS加密。首先在这个网站上测试一下自己的服务器究竟处于什么水平。htt_windows 开启tlsv1.2
安装MySQL过程中（最后starting server）报错解决方案_安装mysql过程startingserver报错-程序员宅基地
文章浏览阅读161次。安装MySQL过程中（最后starting server）报错解决方案_安装mysql过程startingserver报错
VC++6.0的简单使用！(保姆级)_vc++6.0用不用加return 0-程序员宅基地
文章浏览阅读1.7w次，点赞56次，收藏195次。VC++6.0的简单使用！(保姆级)新建文件夹这个文件夹来存放新建的C文件，便于之后的整理。此文件夹放在一个自己容易找到的地方，比如桌面！打开VC++6.0新建C文件打开软件后，点击左上角文件，选择新建选择文件位置以及类型1.点击文件，选择C++ Source file2.右边文件名处，填写名称，不支持中文，数字或英文，后缀为 .c 比如1.c3.点击位置框处后三点，选择位置，目标位置为刚建好的 c 文件夹因为广告建在桌面，所以找到Desktop文件夹即可找到，Desktop默认在_vc++6.0用不用加return 0
营收增长/市值却下跌超六成，安霸的「危机」待解_安霸是如何落后的-程序员宅基地
文章浏览阅读321次。首次发布等效算力500eTOPS的AI域控制器CV3系列SoC，收购4D成像毫米波雷达公司（傲酷），一系列在汽车赛道的布局，没有能够挽救传统视觉芯片供应商安霸（Ambarella）的股价下行颓势。数据显示，在过去的4个多月时间，安霸股价从2021年12月8日最高点的216.84美元，急速下滑至83.6美元（截至美国时间4月22日收盘），总市值只剩下31.82亿美元，距离高点下滑61.45%。财报数据显示，安霸2022财年第四季度的收入为9020万美元，比2021财年同期的6210万美元增长了45%。_安霸是如何落后的
html中图片只显示部分,两种方法实现css切割图片，只取图片中一部分-程序员宅基地
文章浏览阅读6.5k次。参考地址：http://www.jb51.net/css/150036.html场景：如果一个页面有个img小图标，那么访问浏览器的时候会因为加载图片导致浏览速度放慢。这个时候将这么多的小图标放在一起，整合成一个img，那么只需要访问一张图片就可以了。就可以减少请求图片的次数整合后的img那么整合后的img有了，在使用的过程中如何获取我们想要的像素范围呢？上面的参考地址有写。我就照着做一遍吧。方法..._前端怎么让图片只展示一半内容